IDES Prospector Already have an account? Login Here

IDES

Flexaren 07002

Ethylene Vinyl Acetate Copolymer

Supplied by Innospec Active Chemicals

The technical datasheet with complete property values for Flexaren 07002 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Flexaren 07002 is an ethylene vinyl acetate copolymer with 7% content of vinyl acetate. The product is manufactured by high pressure tubular process. It does not contain additives.

Flexaren 07002 is more elastic than LDPE, compatible with a wide range of polymers and can be processed with the same equipment.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Features 
  • Additive Free
  • Copolymer
  • Good Flexibility
  • Low Temperature Flexibility
  
Uses 
  • Masterbatch
  • Profiles
  • Sheet
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Film Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Density 2
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Vinyl Acetate Content
wt%
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2/1BA
Break
psi
  
50% Strain
psi
  
Tensile Strain (Break)
%
 ISO 527-2/1BA
Hardness
Nominal Value
Unit
Test Method
Shore Hardness
     ISO 868
Shore A
 
  
Shore D
 
  
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Flexaren 07002, Flexaren , Flexaren07002, 07002, Ethylene Vinyl Acetate Copolymer, EVA, Polyethylene, PE, Innospec, EthyleneVinylAcetateCopolymer
Features
Features may also be described by the following terms: Good Flexibility, Flexible, Additive Free, No Additives, Low Temperature Flexibility.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EEC (1).
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2At 20°C
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.