|
All physical properties were measured on specimens cut from compression molded plaques per ASTM D 4703, Procedure A, Type I and conditioned at 23°C (73°F) for a minimum of 40 hours per ASTM D 618 prior to testing. All stress/strain tests used specimens cut with a Type C die and tested with a grip separation of 25 mm (1") and a crosshead speed of 20 in/min. Tensile set was determined from a specimen held at 100% strain for 10 minutes and allowed to rest for 10 minutes. Elongation at break - the specimen did not break during testing; inequalities reported represent where instrument reached its machine limit.
For applications requiring FDA certification, please contact your ExxonMobil Chemical representative for compliance information. For information specific to product handling and storage, refer to the TechNote, "Vistamaxx Propylene-based Elastomer Guidelines for Storage and Handling". For data specific to chemical resistance, refer to the Technical Literature (TL), "Chemical Resistance of Vistamaxx Propylene-based Elastomers".
|
|
For detailed Product Stewardship information, please contact Customer Service.
This product, including the product name, shall not be used or tested in any medical application without the prior written acknowledgement of ExxonMobil Chemical as to the intended use.
|
|
This supplier and product may also be known by these terms: Exxon, Exxon Mobil, Exxon Mobile, Advanced Elastomer Systems, AES, Vistamax
Product names can be difficult to match. You may have searched any one of these terms to find this product: Vistamaxx™ 6202, Vistamaxx 6202, Vistamaxx™ , Vistamaxx, Vistamaxx6202, 6202, Elastomer, Propylene-based, Elastomer Propylenebased, Elastomer, Propylene:based, Elastomer, Propylene/based, Elastomer, Propylene+based, Elastomer, Propylene_based, Elastomer, Propylene based, PP Elastomer, Thermoplastic Elastomer, TPE, ExxonMobil, ElastomerPropylenebased, Elastomer Propylene_based, Elastomer Propylene based, PPElastomer, ThermoplasticElastomer, ElastomerPropylene_based
|