IDES Prospector Already have an account? Login Here

IDES

Borcoat™ BA213E

Polypropylene

Supplied by Borealis AG

The technical datasheet with complete property values for Borcoat™ BA213E is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Borcoat BA213E is a polypropylene compound used as a component in thermal insulation coating systems.

Borcoat BA213E The product can be used to make foam for PP multi-layer thermal insulation systems at temperatures up to 140°C
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Foamable
  • Recyclable Material
 
Uses 
  • Foam
  • Insulation
  • Pipe Coatings
Forms 
  • Pellets
Processing Method 
  • Coating
  • Extrusion Coating
 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ISO 1133
Water Absorption - 1 day
mg/cm²
ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
ISO 527-2/50
Tensile Strain (Yield)
%
ISO 527-2/50
Flexural Modulus 2
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
ISO 180/A
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ISO 306/A50
Melting Temperature (DSC)
°F
ISO 3146
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Borcoat™ BA213E, Borcoat BA213E, Borcoat™ , Borcoat, BorcoatBA213E, BA 213 E, BA213E, BA213, 213E, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Borealis, PolypropyleneUnspecified, PPUnspecified, 213BA
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Uses
Uses may also be described by the following terms: Pipe Coatings, Pipe Coating.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
 
Cylinder Zone 2 Temp.
°F
 
Cylinder Zone 3 Temp.
°F
 
Cylinder Zone 4 Temp.
°F
 
Cylinder Zone 5 Temp.
°F
 
Melt Temperature
°F
 
Die Temperature
°F
 
Extrusion Notes
Head: 210 to 220°C
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.