IDES Prospector Already have an account? Login Here

IDES

Bormod™ BH348MO

Polypropylene Copolymer

Supplied by Borealis AG

The technical datasheet with complete property values for Bormod™ BH348MO is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Bormod BH348MO is a polypropylene copolymer characterized by high impact strength, fast flow and crystallisation speed.

The material is nucleated with Borstar Nucleation Technology (BNT). This grade contains antistatic and demoulding additives which, together with enhanced nucleation, create a high potential for cycle time reduction.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  • South America
Additive 
  • Antistatic
  • Mold Release
  • Nucleating Agent
Features 
  • Antistatic
  • Copolymer
  • Good Flow
  • Good Mold Release
  • High Impact Resistance
  • Nucleated
  • Recyclable Material
Uses 
  • Food Containers
  • Thin-walled Containers
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Yield)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-4°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bormod™ BH348MO, Bormod BH348MO, Bormod™ , Bormod, BormodBH348MO, BH 348 MO, BH348MO, BH348, 348MO, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, Borealis, PolypropyleneCopolymer, PPCopolymer, 348BH
Features
Features may also be described by the following terms: High Impact Resistance, Good Flow, Good Mold Release, Easy Release, Good Demolding.
Uses
Uses may also be described by the following terms: Food Containers, Food Container, Thin-Walled Containers, Thin-Walled Container, Thin-Wall Containers, Thin-Wall Container, Thinwall Containers, Thinwall Container.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Holding Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.