IDES Prospector Already have an account? Login Here

IDES

Borstar® HE3410

High Density Polyethylene

Supplied by Borealis AG

The technical datasheet with complete property values for Borstar® HE3410 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Borstar HE3410 is a bimodal polyethylene compound produced by the advanced Borstar technology.

Well dispersed carbon black gives outstanding UV resistance. Long term stability is ensured by an optimised stabilisation system.

Borstar HE3410 is classified as an MRS 8.0 material (PE80).
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  • South America
Additive 
  • Carbon Black (20000 ppm)
  • Unspecified Stabilizer
  
Features 
  • Good Stability
  • Good UV Resistance
  • Recyclable Material
Uses 
  • Piping
  • Semiconductor Molding Compounds
  • Tubing
Agency Ratings 
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Pipe Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density 2
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)
g/10 min
 ISO 1133
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (32°F)
ft·lb/in²
 ISO 179/1eA
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ISO 306/B50
Oxidation Induction Time 3 (410°F)
min
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Borstar® HE3410, Borstar HE3410, Borstar® , Borstar, BorstarHE3410, HE 3410, HE3410, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Borealis, PolyethyleneHighDensity, 3410HE
Features
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Good Stability.
Uses
Uses may also be described by the following terms: Piping, Pipe, Tubing, Tube.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): PPI (1).
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Head Temperature: 200 to 210°C
Notes
1Typical properties: these are not to be construed as specifications.
2Compound
3EN 728
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.