IDES Prospector Already have an account? Login Here

IDES

Xmod™ GD302HP

Polypropylene

Glass Fiber Reinforcement, 30%

Supplied by Borealis AG

The technical datasheet with complete property values for Xmod™ GD302HP is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Xmod GD302HP is a 30 % chemically coupled high performance glass fibre reinforced polypropylene compound intended for injection moulding.

This material has an excellent balance between impact strength and stiffness and is easy to process.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  • South America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Chemically Coupled
  • Good Processability
  • Good Stiffness
  • High Impact Resistance
  • Recyclable Material
Uses 
  • Automotive Applications
  • Automotive Instrument Panel
  • Automotive Interior Parts
  • Automotive Interior Trim
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage 2
     Internal Method
Across Flow: 0.0787 in
%
  
Flow: 0.0787 in
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (Injection Molded)
psi
 ISO 527-2/1
Tensile Stress (Yield, Injection Molded)
psi
 ISO 527-2
Tensile Strain (Yield, Injection Molded)
%
 ISO 527-2
Flexural Modulus 3 (Injection Molded)
psi
 ISO 178
Flexural Strength (Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-4°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-4°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Notched Izod Impact Strength
     ISO 180/1A
-4°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Xmod™ GD302HP, Xmod GD302HP, Xmod™ , Xmod, XmodGD302HP, GD 302 HP, GD302HP, GD302, 302HP, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Borealis, PolypropyleneUnspecified, PPUnspecified, 302GD
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Good Stiffness, High Impact Resistance, Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Automotive Instrument Panel, Automotive Dash Board, Automotive Applications, Automotive Sector.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Holding Pressure
psi
  
Injection Notes
Feeding Temperature: 40 to 80°C
Back pressure: As low as possible
Screw speed: Low to medium
Flow front speed: 100 to 200 mm/s
Notes
1Typical properties: these are not to be construed as specifications.
2150x80x2 mm
30.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.