TRIBOCOMP® PA12 GF20 TS3 Epic Polymers Polyamide 12 (Glass Fiber Reinforcement, 20%)

General
Material Status	Commercial: Active
Availability	Europe
Filler / Reinforcement	Glass Fiber Reinforcement, 20% Filler by Weight
Uses	Gears

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage - Flow		%	ISO 294-4
Water Absorption			ISO 62
Saturation, 73°F		%
Equilibrium, 73°F, 50% RH		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus			ISO 527-2
73°F		psi
194°F		psi
Tensile Stress			ISO 527-2
Yield, 73°F		psi
Yield, 194°F		psi
Tensile Strain (Break, 73°F)		%	ISO 527-2
Flexural Modulus (73°F)		psi	ISO 178
Flexural Strength (73°F)		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
CLTE - Flow (73°F)		in/in/°F	ISO 7991
Thermal Conductivity		Btu·in/hr/ft²/°F	ISO 8302
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohm	ASTM D257
Comparative Tracking Index		V	IEC 60112
Electric Strength		V/mil	IEC 60243-1
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TRIBOCOMP® PA12 GF20 TS3, TRIBOCOMP PA12 GF20 TS3, TRIBOCOMP® , TRIBOCOMP, TRIBOCOMPPA12GF20TS3, PA 12 GF 20 TS 3, PA12 GF20 TS3, PA12, 12GF, GF20, 20TS, TS3, PA12GF20TS3, Polyamide 12, Nylon 12, Polyamide, Nylon, Epic Polymers, Polyamide12, Nylon12, 12PA
Generic Name
Generic Name may also be described by the following terms: PA12.

Notes

¹Typical properties: these are not to be construed as specifications.

TRIBOCOMP® PA12 GF20 TS3