TRIBOCOMP® PA6.6 GF30 TS7 Epic Polymers Polyamide 66 (Glass Fiber Reinforcement, 30%)

General

Material Status

Commercial: Active

Availability

Europe

Filler / Reinforcement

Glass Fiber Reinforcement, 30% Filler by Weight

Additive

PTFE Lubricant (15%)

Silicone Lubricant (2%)

Features

Lubricated

Physical	Dry	Conditioned	Unit	Test Method
Density		--	g/cm³	ISO 1183
Molding Shrinkage - Flow		--	%	ISO 294-4
Water Absorption				ISO 62
Saturation, 73°F		--	%
Equilibrium, 73°F, 50% RH		--	%
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus				ISO 527-2
73°F			psi
194°F		--	psi
248°F		--	psi
Tensile Stress				ISO 527-2
Yield, 73°F			psi
Yield, 194°F		--	psi
Yield, 248°F		--	psi
Tensile Strain (Break, 73°F)			%	ISO 527-2
Flexural Modulus (73°F)			psi	ISO 178
Flexural Strength (73°F)			psi	ISO 178
Coefficient of Friction²				ASTM D3702
vs. Itself - Dynamic		--
vs. Itself - Static		--
Wear Factor (73°F)		--		ASTM D3702
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (73°F)		--	ft·lb/in²	ISO 179
Charpy Unnotched Impact Strength (73°F)		--	ft·lb/in²	ISO 179
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		--	°F	ISO 75-2/B
264 psi, Unannealed		--	°F	ISO 75-2/A
CLTE - Flow (73°F)		--	in/in/°F	ISO 7991
Thermal Conductivity		--	Btu·in/hr/ft²/°F	ISO 8302
Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity		--	ohm	ASTM D257
Comparative Tracking Index			V	IEC 60112
Electric Strength			V/mil	IEC 60243-1
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL		--		UL 94
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: TRIBOCOMP® PA6.6 GF30 TS7, TRIBOCOMP PA66 GF30 TS7, TRIBOCOMP® , TRIBOCOMP, TRIBOCOMPPA66GF30TS7, PA 6 6 GF 30 TS 7, PA6.6 GF30 TS7, PA66 GF30 TS7, PA6, 66, 6GF, GF30, 30TS, TS7, PA66GF30TS7, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Epic Polymers, Polyamide66, Nylon66, 6PA
Generic Name
Dry	Generic Name may also be described by the following terms: PA66.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: TRIBOCOMP® PA6.6 GF30 TS7, TRIBOCOMP PA66 GF30 TS7, TRIBOCOMP® , TRIBOCOMP, TRIBOCOMPPA66GF30TS7, PA 6 6 GF 30 TS 7, PA6.6 GF30 TS7, PA66 GF30 TS7, PA6, 66, 6GF, GF30, 30TS, TS7, PA66GF30TS7, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Epic Polymers, Polyamide66, Nylon66, 6PA Generic Name may also be described by the following terms: PA66.

Notes

¹Typical properties: these are not to be construed as specifications.

²23°C

TRIBOCOMP® PA6.6 GF30 TS7

Polyamide 66

Glass Fiber Reinforcement, 30%

Supplied by EPIC Polymers Ltd.