IDES Prospector Already have an account? Login Here

IDES

Devcon Epoxies High Temp 450

Epoxy; Epoxide

Ceramic Bead Filler

Supplied by Devcon

The technical datasheet with complete property values for Devcon Epoxies High Temp 450 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Ceramic Bead Filler
Features 
  • Good Abrasion Resistance
  • Good Chemical Resistance
  • Good Wear Resistance
Uses 
  • Coating Applications
Appearance 
  • Grey
Forms 
  • Pellets
Processing Method 
  • Casting
Physical
Nominal Value
Unit
Test Method
Apparent Density
g/cm³
 ASTM D1895
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength (Break)
psi
 ASTM D638
Flexural Strength (Yield)
psi
 ASTM D790
Compressive Strength
psi
 ASTM D695
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Max. Continuous Use Temperature
°F
 ASTM D794
CLTE - Flow
in/in/°F
 ASTM D696
Electrical
Nominal Value
Unit
Test Method
Dielectric Strength
V/mil
 ASTM D149
Dielectric Constant
 
 ASTM D150
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components      
Hardener
 
  
Resin
 
  
Pot Life (75°F)
min
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Devcon Epoxies High Temp 450, Devcon Epoxies , DevconEpoxiesHighTemp450, DevconEpoxies, EpoxiesHigh Temp 450, EpoxiesHighTemp, Epoxies, EpoxiesHighTemp450, High Temp 450, HighTemp, Temp450, HighTemp450, Epoxy; Epoxide, Epoxy Epoxide, Epoxy, Devcon, EpoxyEpoxide, TempHigh, TempEpoxiesHigh
Features
Features may also be described by the following terms: Good Abrasion Resistance, Abrasion Resistant, Good Chemical Resistance, Chemical Resistant, Good Wear Resistance, Wear Resistant.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.