Already have an account?
Login Here
IDES
UMG ABS® GSM
Acrylonitrile Butadiene Styrene
Supplied by UMG ABS, Ltd.
The technical datasheet with complete property values for UMG ABS® GSM is available to members of the
Prospector Plastics Database
.
Register to view full datasheet
.
Register to View Full Datasheet
General
Material Status
Commercial: Active
Availability
Asia Pacific
RoHS Compliance
Forms
Pellets
Processing Method
Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
2
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR)
(220°C/10.0 kg)
in³/10min
ISO 1133
Molding Shrinkage - Flow
(73°F)
%
ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
(73°F)
psi
ISO 527-2
Tensile Stress
(Yield, 73°F)
psi
ISO 527-2
Flexural Modulus
3
(73°F)
psi
ISO 178
Flexural Strength
3
(73°F)
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ISO 179
-22°F
ft·lb/in²
73°F
ft·lb/in²
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness
(R-Scale, 73°F)
ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
(264 psi, Unannealed)
°F
ISO 75-2/Af
CLTE - Flow
in/in/°F
ISO 11359-2
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
(0.0591 in)
UL 94
UL File Number
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: UMG ABS® GSM, UMG ABS GSM, UMG ABS® , UMG ABS, UMGABSGSM, UMGABS, GSM, Acrylonitrile Butadiene Styrene, ABS, AcrylonitrileButadieneStyrene
Injection
Nominal Value
Unit
Drying Temperature
°F
Drying Time
hr
Rear Temperature
°F
Middle Temperature
°F
Front Temperature
°F
Nozzle Temperature
°F
Processing (Melt) Temp
°F
Mold Temperature
°F
Injection Pressure
psi
Injection Rate
Back Pressure
psi
Screw Speed
rpm
Notes
1
Typical properties: these are not to be construed as specifications.
2
At 23°C
3
0.079 in/min
Copyright © 2012
IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.