4PROP 4D21120 4Plas Polypropylene Homopolymer (Talc Filler, 20%)

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR)²		g/10 min	ISO 1133
Molding Shrinkage - Flow		in/in	ASTM D955
Water Absorption (Saturation, 73°F)		%	ISO 62
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield, 73°F)		psi	ISO 527-2
Tensile Strain (Break, 73°F)		%	ISO 527-2
Flexural Modulus (73°F)		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Unnotched Izod Impact			ASTM D256
32°F		ft·lb/in
73°F		ft·lb/in
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (66 psi, Unannealed)		°F	ISO 75-2/B
Vicat Softening Temperature		°F	ISO 306/B
Ball Pressure Test (257°F)			IEC 60335-1
Flammability	Nominal Value	Unit	Test Method
Glow Wire Ignition Temperature (0.0787 in)		°F	IEC 60695-2-13
Oxygen Index		%	ASTM D2863
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: 4PROP® 4D21120, 4PROP 4D21120, 4PROP® , 4PROP, 4PROP4D21120, 4 D 21120, 4D21120, 4D, D21120, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, 4Plas, PolypropyleneHomopolymer, PPHomopolymer, D4

Injection	Nominal Value	Unit
Suggested Max Regrind		%
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Rate
Injection Notes
Back Pressure: Low Injection Pressure: Medium

Notes

¹Typical properties: these are not to be construed as specifications.

²200°C

4PROP® 4D21120