IDES Prospector Already have an account? Login Here

IDES

4PROP® 4D22130

Polypropylene Homopolymer

Glass Fiber Reinforcement, 30%

Supplied by 4Plas

The technical datasheet with complete property values for 4PROP® 4D22130 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Chemically Coupled
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) 2
g/10 min
ISO 1133
Molding Shrinkage - Flow
in/in
ASTM D955
Water Absorption (Saturation, 73°F)
%
ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield, 73°F)
psi
ISO 527-2
Tensile Strain (Break, 73°F)
%
ISO 527-2
Flexural Modulus (73°F)
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Unnotched Izod Impact
    ASTM D256
32°F
ft·lb/in
 
73°F
ft·lb/in
 
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
ISO 75-2/B
Vicat Softening Temperature
°F
ISO 306/B
Ball Pressure Test (257°F)
 
IEC 60335-1
Flammability
Nominal Value
Unit
Test Method
Glow Wire Ignition Temperature (0.0787 in)
°F
IEC 60695-2-13
Oxygen Index
%
ASTM D2863
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: 4PROP® 4D22130, 4PROP 4D22130, 4PROP® , 4PROP, 4PROP4D22130, 4 D 22130, 4D22130, 4D, D22130, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, 4Plas, PolypropyleneHomopolymer, PPHomopolymer, D4
Injection
Nominal Value
Unit
 
Suggested Max Regrind
%
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Rate
 
 
Injection Notes
Back Pressure: Low
Injection Pressure: Medium
Notes
1Typical properties: these are not to be construed as specifications.
2200°C
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.