IDES Prospector Already have an account? Login Here

IDES

Qenos PE HD1155

High Density (HMW) Polyethylene

Supplied by Qenos Pty Ltd

The technical datasheet with complete property values for Qenos PE HD1155 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
HD1155 is a very high molecular weight High Density Polyethylene copolymer resin, especially formulated for use in large part moldings where strength and rigidity are of importance. It combines excellent impact strength with good ESCR.

HD1155 is especially suited for blow molding self-supporting drums and industriall containers. HD1155 is also suitable for Dangerous Goods (DG) applications - depencding on the design of the container, the goods to be stored and the DG grouping. Suitability for use in any application should be determined by appropriate performance testing.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Copolymer
  • Good Strength
  • High Density
  • High ESCR (Stress Crack Resist.)
  • High Impact Resistance
  • High Molecular Weight
  • High Rigidity
Uses 
  • Drums
  • Industrial Containers
  
Agency Ratings 
 
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/2.16 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Environmental Stress-Cracking Resistance
     ASTM D1693B
10% Igepal, F50
hr
  
100% Igepal, F50
hr
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (-22°F)
ft·lb/in
 ASTM D256A
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Qenos PE HD1155, Qenos PE , QenosPEHD1155, QenosPE, PEHD 1155, PEHD1155, PE, HD 1155, HD1155, Polyethylene, High Density, Polyethylene High Density, Polyethylene, High Density (HMW), Polyethylene High Density HMW, HDPE, HMW, HDPE HMW, Polyethylene, Qenos, PolyethyleneHighDensityHMW, HDPEHMW, 1155HD, 1155PEHD
Features
Features may also be described by the following terms: High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, High Impact Resistance, High Rigidity, Good Strength, High Molecular Weight, High MW, High Density, High Specific Gravity.
Uses
Uses may also be described by the following terms: Industrial Containers, Industrial Containers.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), AS (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.