IDES Prospector Already have an account? Login Here

IDES

Qenos PE MDF169

Medium Density Polyethylene

Supplied by Qenos Pty Ltd

The technical datasheet with complete property values for Qenos PE MDF169 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
MDF169 is a non-pigmented, high molecular weight MDPE co-polymer, developed as a general purpose resin for use in non-standard pipe applications. MDF169 contains antioxidants to protect it during extrusion and end use.

MDF169 has been designed for extrusion into a full range of non-standard pipe products. MDF169 is not designed for use in pressure applications. Addition of a UV stabilizer should be considered where the intended application involves intermittent to extended exposure to sunlight. Suitability for use in any application should be determined by appropriate performance testing.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Copolymer
  • General Purpose
  • High Molecular Weight
  • Medium Density
Uses 
  • General Purpose
  • Piping
  
Appearance 
  • Natural Color
Processing Method 
  • Extrusion
  • Pipe Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/21.6 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2 (0.0748 in)
psi
 ASTM D638
Tensile Strength 2
     ASTM D638
Yield, 0.0748 in
psi
  
Break, 0.0748 in
psi
  
Tensile Elongation 2 (Break, 0.0748 in)
%
 ASTM D638
Thermal
Nominal Value
Unit
Test Method
Oxidation Induction Time (410°F)
min
 ISO 11357-6
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Qenos PE MDF169, Qenos PE , QenosPEMDF169, QenosPE, PEMDF 169, PEMDF169, PE, MDF 169, MDF169, Polyethylene, Medium Density, Polyethylene Medium Density, MDPE, Polyethylene, Qenos, PolyethyleneMediumDensity, 169MDF, 169PEMDF
Features
Features may also be described by the following terms: Medium Density, Medium Specific Gravity, High Molecular Weight, High MW.
Uses
Uses may also be described by the following terms: Piping, Pipe.
Notes
1Typical properties: these are not to be construed as specifications.
2Type IV, 2.0 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.