IDES Prospector Already have an account? Login Here

IDES

BorSafe™ HE3490-LS

High Density Polyethylene

Supplied by Borealis AG

The technical datasheet with complete property values for BorSafe™ HE3490-LS is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
BorSafe HE3490-LS is a bimodal polyethylene compound produced by the advanced Borstar technology.

Well dispersed carbon black gives outstanding UV resistance. Long term stability is ensured by an optimised stabilisation system.

BorSafe HE3490-LS is classified as an MRS 10.0 material (PE100).

It is especially designed for the production of larger diameter, thick wall pipe, but can be processed for the whole range of diameters. It also shows excellent resistance to rapid crack propagation and slow crack growth.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Additive 
  • Carbon Black (20000 ppm)
  • Unspecified Stabilizer
  • UV Stabilizer
Features 
  • Good Crack Resistance
  • Good Stability
  • Good UV Resistance
Uses 
  • Industrial Applications
  • Piping
  
Agency Ratings 
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Pipe Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density 2
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)
g/10 min
 ISO 1133
Carbon Black Content
%
 ASTM D1603
Carbon Black Dispersion
 
 ISO 18553
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Break)
%
 ISO 527-2
Resistance to Rapid Crack Propagation, Pc - S4 test 3 (32°F)
psi
 ISO 13477
Resistance to Slow Crack Growth 4 (176°F)
month
 ISO 13479
Thermal
Nominal Value
Unit
Test Method
Oxidation Induction Time 5 (392°F)
min
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: BorSafe™ HE3490-LS, BorSafe HE3490LS, BorSafe™ , BorSafe, BorSafeHE3490LS, HE 3490, HE 3490 LS, HE3490-LS, HE3490LS, HE3490:LS, HE3490/LS, HE3490+LS, HE3490_LS, HE3490 LS, HE3490, 3490LS, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Borealis, PolyethyleneHighDensity, 3490HE
Features
Features may also be described by the following terms: Good Stability, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Good Crack Resistance, Crack Resistant.
Uses
Uses may also be described by the following terms: Piping, Pipe.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): PPI (1).
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Head: 200 to 210°C
Notes
1Typical properties: these are not to be construed as specifications.
2Compound, ISO 1872-2
3Test pipe 250 mm, SDR11
49.2 bar
5EN 728
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.