IDES Prospector Already have an account? Login Here

IDES

Ketron® PEEK-GF30

Polyetheretherketone

Glass Fiber Reinforcement, 30%

Supplied by Quadrant Engineering Plastic Products

The technical datasheet with complete property values for Ketron® PEEK-GF30 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Good Creep Resistance
  • Good Dimensional Stability
  • High Stiffness
Uses 
  • Structural Parts
Appearance 
  • Natural Color
Forms 
  • Disc
  • Preformed Parts
  • Rod
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Water Absorption
     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1B/1
Tensile Stress (Break)
psi
 ISO 527-2/1B/5
Tensile Strain (Break)
%
 ISO 527-2/1B/5
Compressive Stress
     ISO 604/1
2% Strain
psi
  
1% Strain
psi
  
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength
ft·lb/in²
 ISO 179/1eU
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale, 0.394 in)
 
 ISO 2039-2
Ball Indentation Hardness (0.394 in)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Max. Continuous Use Temperature
      
-- 2
°F
  
-- 3
°F
  
Melting Temperature (DSC)
°F
  
CLTE - Flow
      
73 to 212°F
in/in/°F
  
73 to 302°F
in/in/°F
  
> 302°F
in/in/°F
  
Thermal Conductivity (73°F)
Btu·in/hr/ft²/°F
  
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Relative Permittivity
     IEC 60250
100 Hz
 
  
1 MHz
 
  
Dissipation Factor
     IEC 60250
100 Hz
 
  
1 MHz
 
  
Comparative Tracking Index
V
 IEC 60112
Electric Strength (0.0394 in)
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0591 in
 
  
0.118 in
 
  
Oxygen Index
%
 ISO 4589-2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ketron® PEEK-GF30, Ketron PEEKGF30, Ketron® , Ketron, KetronPEEKGF30, PEEK, PEEK GF 30, PEEK-GF30, PEEKGF30, PEEK:GF30, PEEK/GF30, PEEK+GF30, PEEK_GF30, PEEK GF30, PEEKGF, GF30, Polyetheretherketone, Polyaryletherketone, PAEK, Quadrant, GFPEEK
Features
Features may also be described by the following terms: Good Creep Resistance, Creep Resistant, Good Dimensional Stability, Dimensionally Stable, High Stiffness.
Notes
1Typical properties: these are not to be construed as specifications.
220000 hrs
3Short periods
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.