IDES Prospector Already have an account? Login Here

IDES

Quadrant EPP ERTACETAL® H-TF

Acetal (POM) Homopolymer

Supplied by Quadrant Engineering Plastic Products

The technical datasheet with complete property values for Quadrant EPP ERTACETAL® H-TF is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • PTFE Lubricant
Features 
  • Good Strength
  • Good Wear Resistance
  • Low Friction
  • Lubricated
  • Soft
Appearance 
  • Brown
Forms 
  • Disc
  • Preformed Parts
  • Rod
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Water Absorption
     ISO 62
73°F, 24 hr, 0.118 in
%
  
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Water Absorption
     ISO 62
73°F, 0.12 in 2
mg
  
73°F, 0.12 in 3
%
  
73°F, 0.12 in 4
mg
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 5
psi
 ISO 527-2/1B/1
Tensile Stress 5 (Yield)
psi
 ISO 527-2/1B/20
Tensile Strain 5 (Break)
%
 ISO 527-2/1B/20
Tensile Creep Modulus 6, 7 (1000 hr)
psi
 ISO 899-1
Compressive Stress
     ISO 604/1
5% Strain
psi
  
2% Strain
psi
  
1% Strain
psi
  
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength
ft·lb/in²
 ISO 179/1eU
Notched Izod Impact Strength 5
ft·lb/in²
 ISO 180/2A
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale, 0.394 in)
 
 ISO 2039-2
Ball Indentation Hardness (0.394 in)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Max. Continuous Use Temperature
      
-- 8
°F
  
-- 9
°F
  
-- 10
°F
  
Melting Temperature (DSC)
°F
  
CLTE - Flow
      
73 to 140°F
in/in/°F
  
73 to 302°F
in/in/°F
  
Thermal Conductivity (73°F)
Btu·in/hr/ft²/°F
  
Service Temperature - Minimum
°F
  
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity 5
ohms
 IEC 60093
Volume Resistivity 5
ohm·cm
 IEC 60093
Relative Permittivity
     IEC 60250
100 Hz 5
 
  
1 MHz 11
 
  
Dissipation Factor
     IEC 60250
100 Hz 11
 
  
1 MHz 5
 
  
Comparative Tracking Index 5
V
 IEC 60112
Electric Strength 5 (0.0394 in, in Oil)
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.118 in
 
  
0.236 in
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Quadrant EPP ERTACETAL® H-TF, Quadrant EPP ERTACETAL HTF, Quadrant EPP , QuadrantEPPERTACETALHTF, QuadrantEPP, ERTACETAL® H, ERTACETAL H, EPPERTACETAL® H-TF, EPPERTACETAL HTF, EPPERTACETAL® H:TF, EPPERTACETAL® H/TF, EPPERTACETAL® H+TF, EPPERTACETAL® H_TF, EPPERTACETAL® H TF, EPPERTACETALH, EPPERTACETAL® H, EPPERTACETAL H, EPPERTACETALHTF, EPPERTACETAL H_TF, EPPERTACETAL H TF, ERTACETAL® H-TF, ERTACETAL HTF, ERTACETAL® H:TF, ERTACETAL® H/TF, ERTACETAL® H+TF, ERTACETAL® H_TF, ERTACETAL® H TF, ERTACETALH, HTF, EPPERTACETALH_TF, ERTACETALHTF, ERTACETAL H_TF, ERTACETAL H TF, Acetal Homopolymer, Acetal Homopolymer, ERTACETALH_TF, Acetal (POM) Homopolymer, Acetal POM Homopolymer, Acetal, pom, Quadrant, AcetalPOMHomopolymer, HERTACETAL, HEPPERTACETAL
Features
Features may also be described by the following terms: Good Strength, Low Friction, Good Wear Resistance, Wear Resistant.
Notes
1Typical properties: these are not to be construed as specifications.
2Weight, 24 hrs
396 hrs
4Weight, 96 hrs
5Conditioned
6Type 1B
7Conditioned, 1% Strain
820000 hrs
95000 hrs
10Short periods
11Dry
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.