IDES Prospector Already have an account? Login Here

IDES

Panlite® G-3130PH

Polycarbonate

Glass Fiber Reinforcement, 30%

Supplied by Teijin Kasei America, Inc. (Teijin Chemicals)

The technical datasheet with complete property values for Panlite® G-3130PH is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Good Surface Finish
  • Paintable
  
Uses 
  • Camera Applications
  • Coating Applications
  • Engineering Parts
  • Housings
  
Appearance 
  • Opaque
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage
     Internal Method
Across Flow: 0.157 in
%
  
Flow: 0.157 in
%
  
Water Absorption (73°F, 24 hr)
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Break)
psi
 ISO 527-2/5
Tensile Strain (Break)
%
 ISO 527-2/5
Flexural Modulus 2
psi
 ISO 178
Flexural Strength 2
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179
Charpy Unnotched Impact Strength
ft·lb/in²
 ISO 179
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
CLTE
     ISO 11359-2
Flow
in/in/°F
  
Transverse
in/in/°F
  
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Relative Permittivity
     IEC 60250
100 Hz
 
  
1 MHz
 
  
Dissipation Factor
     IEC 60250
100 Hz
 
  
1 MHz
 
  
Comparative Tracking Index
V
 IEC 60112
Electric Strength 3
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0669 in)
 
 UL 94
UL
Nominal Value
Unit
Test Method
RTI Str (0.0591 in)
°F
 UL 746
RTI Imp (0.0591 in)
°F
 UL 746
RTI Elec (0.0591 in)
°F
 UL 746
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Panlite® G-3130PH, Panlite G3130PH, Panlite® , Panlite, PanliteG3130PH, G 3130 PH, G-3130PH, G3130PH, G:3130PH, G/3130PH, G+3130PH, G_3130PH, G 3130PH, G3130, 3130PH, Polycarbonate, PC, Teijin, 3130G
Features
Features may also be described by the following terms: Good Surface Finish.
Uses
Uses may also be described by the following terms: Camera Applications, Cameras, Housings, Housing, Engineering Parts.
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
3short time test
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.