IDES Prospector Already have an account? Login Here

IDES

Panlite® AM-8030

Polycarbonate + Polyester

Supplied by Teijin Kasei America, Inc. (Teijin Chemicals)

The technical datasheet with complete property values for Panlite® AM-8030 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • General Purpose
  • Good Chemical Resistance
  • Good Flow
  • Good Impact Resistance
  • High Heat Resistance
Uses 
  • Automotive Applications
  • Handles
  
Appearance 
  • Opaque
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (280°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage
     Internal Method
Across Flow: 0.157 in
%
  
Flow: 0.157 in
%
  
Water Absorption (73°F, 24 hr)
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress
     ISO 527-2/50
Yield
psi
  
Break
psi
  
Tensile Strain
     ISO 527-2/50
Yield
%
  
Break
%
  
Flexural Modulus 2
psi
 ISO 178
Flexural Strength 2
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179
Charpy Unnotched Impact Strength
 
 ISO 179
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
CLTE
     ISO 11359-2
Flow
in/in/°F
  
Transverse
in/in/°F
  
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Panlite® AM-8030, Panlite AM8030, Panlite® , Panlite, PanliteAM8030, AM, AM-8030, AM8030, AM:8030, AM/8030, AM+8030, AM_8030, AM 8030, Polycarbonate + Polyester, Polycarbonate Polyester, Polycarbonate : Polyester, Polycarbonate / Polyester, Polycarbonate - Polyester, Polycarbonate _ Polyester, Polycarbonate Polyester, PC+Polyester, PCPolyester, PC:Polyester, PC/Polyester, PC-Polyester, PC_Polyester, PC Polyester, Polycarbonate, PC, Teijin, PolycarbonatePolyester, Polycarbonate_Polyester, 8030AM
Features
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, Good Impact Resistance, High Heat Resistance, Good Flow.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.