IDES Prospector Already have an account? Login Here

IDES

Quadrant EPP Nylatron® GSM Blue

Polyamide 6

Supplied by Quadrant Engineering Plastic Products

The technical datasheet with complete property values for Quadrant EPP Nylatron® GSM Blue is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Nylatron GSM Blue nylon is the first cast nylon to combine both molybdenum disulfide and oil for the load capability of Nylatron GSM nylon, plus improved frictional characteristics. It excels in higher pressures, and at low speeds- up to 40 fpm. It offer 20% lower coefficient of friction, 50% greater limiting PV, and a lower "k" factor than Nylatron GSM, and the lowest "slip-stick" of any nylon product. It is ideal for slide pads, thrust washers and trunion bearings. Nylatron GSM blue should be considered for any oil-filled nylon application. It is dark blue in color.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Molybdenum Disulfide Lubricant
  • Perfluoropolyether Oil Lubricant
 
Features 
  • Hydrocarbon Resistant
  • Low Friction
  • Machinable
Uses 
  • Bearings
  • Thrust Washer
 
Appearance 
  • Blue
Processing Method 
  • Casting
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Water Absorption
    ASTM D570
24 hr
%
 
Saturation
%
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ASTM D638
Tensile Strength (Ultimate)
psi
ASTM D638
Tensile Elongation (Break)
%
ASTM D638
Flexural Modulus
psi
ASTM D790
Flexural Strength (Yield)
psi
ASTM D790
Compressive Modulus
psi
ASTM D695
Compressive Strength (10% Strain)
psi
ASTM D695
Coefficient of Friction (vs. Steel - Static)
 
Internal Method
Wear Factor
10^-10 in³·min/ft·lb·hr
ASTM D3702
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
ASTM D256A
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness
    ASTM D785
M-Scale
 
 
R-Scale
 
 
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
ASTM D648
Maximum Use Temperature - Long Term, Air
°F
 
Peak Crystallization Temperature (DSC)
°F
ASTM D3418
CLTE - Flow 2 (-40 to 300°F)
in/in/°F
ASTM E831
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity 3
ohms
Internal Method
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.125 in, Estimated Rating)
 
UL 94
Additional Information
Nominal Value
Unit
Test Method
Limiting Pressure Velocity 4
MPa·m/s
Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Quadrant EPP Nylatron® GSM Blue, Quadrant EPP Nylatron GSM Blue, Quadrant EPP , QuadrantEPPNylatronGSMBlue, QuadrantEPP, EPPNylatron® GSM Blue, EPPNylatron GSM Blue, EPPNylatronGSM, EPP, EPPNylatronGSMBlue, Nylatron® GSM Blue, Nylatron GSM Blue, NylatronGSM, GSMBlue, NylatronGSMBlue, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Quadrant, Polyamide6, Nylon6, GSMNylatron, GSMEPPNylatron
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Low Friction.
Notes
1Typical properties: these are not to be construed as specifications.
268°F
3EOS/ESD S11.11
44:1 safety factor
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.