|
Density 2
|
|
g/cm³
|
ISO 1183 |
|
Melt Mass-Flow Rate (MFR)
|
|
|
ISO 1133 |
|
190°C/2.16 kg
|
|
g/10 min
|
|
|
190°C/5.0 kg
|
|
g/10 min
|
|
|
Viscosity Number (Reduced Viscosity)
|
|
ml/g
|
ISO 1628 |
|
Spiral Flow Length
|
|
in
|
Internal Method |
|
Tensile Stress
|
|
|
ISO 527-2/50 |
|
Yield, Compression Molded
|
|
psi
|
|
|
Break, Compression Molded
|
|
psi
|
|
|
Tensile Strain (Break, Compression Molded)
|
|
%
|
ISO 527-2/50 |
|
Flexural Strength (3.5% Strain, Compression Molded)
|
|
psi
|
ISO 178 |
|
Charpy Notched Impact Strength
|
|
|
ISO 179 |
|
-22°F, Compression Molded
|
|
ft·lb/in²
|
|
|
73°F, Compression Molded
|
|
ft·lb/in²
|
|
|
Shore Hardness (Shore D, Compression Molded)
|
|
|
ISO 868 |
|
Vicat Softening Temperature
|
|
°F
|
ISO 306/B |
|
Peak Crystallization Temperature (DSC)
|
|
°F
|
ISO 3146 |
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Safrene® D 7255HL, Safrene D 7255HL, Safrene® , Safrene, SafreneD7255HL, D 7255 HL, D 7255HL, D7255, 7255HL, D7255HL, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Safripol , PolyethyleneHighDensity, 7255D
|
|
Features may also be described by the following terms: High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, High Stiffness, Good Strength, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Warp Resistant, Warpage Resistant.
|
|
Uses may also be described by the following terms: Thick-walled Parts, Thick Walled Parts, Thick-wall Parts, Thick Wall Parts, Thickwall Parts.
|
|
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EU (1).
|