IDES Prospector Already have an account? Login Here

IDES

Safrene® F 7650

High Density Polyethylene

Supplied by Safripol (PTY) LTD

The technical datasheet with complete property values for Safrene® F 7650 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Safrene® F 7650 High Density Polyethylene Resin is a medium molecular mass grade with good processing properties. It exhibits good impact strength and environmental stress-crack resistance.

Safrene® F 7650 High Density Polyethylene Resin is recommended for all general purpose applications up to 20 liter in volume.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
Features 
  • Food Contact Acceptable
  • Good Impact Resistance
  • Good Processability
  • High ESCR (Stress Crack Resist.)
  • Medium Molecular Weight
Uses 
  • Containers
  • General Purpose
  
Agency Ratings 
 
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Density 2
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/2.16 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Viscosity Number (Reduced Viscosity)
ml/g
 ISO 1628
Spiral Flow Length
in
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2/50
Yield, Compression Molded
psi
  
Break, Compression Molded
psi
  
Tensile Strain (Break, Compression Molded)
%
 ISO 527-2/50
Flexural Strength (3.5% Strain, Compression Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179
-22°F, Compression Molded
ft·lb/in²
  
73°F, Compression Molded
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, Compression Molded)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/B
Peak Crystallization Temperature (DSC)
°F
 ISO 3146
Additional Information
Blow Molding conditions:
  • Feed Zone: 160 to 180°C
  • Zone 1: 170 to 190°C
  • Zone 2: 180 to 200°C
  • Zone 3: 180 to 190°C
  • Die: 180 to 190°C
  • Melt Temperature: 180 to 190°C
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Safrene® F 7650, Safrene F 7650, Safrene® , Safrene, SafreneF7650, F 7650, F7650, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Safripol , PolyethyleneHighDensity, 7650F
Features
Features may also be described by the following terms: High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Impact Resistance, Medium Molecular Weight, Medium MW, Good Processability, Easy Processing.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EU (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Unannealed
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.