IDES Prospector Already have an account? Login Here

IDES

Safrene® M 9255F

High Density Polyethylene

Supplied by Safripol (PTY) LTD

The technical datasheet with complete property values for Safrene® M 9255F is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Safrene® M 9255F Polyethylene Resin is a high molecular mass polymer grade which exhibits high stiffness and excellent impact resistance at low gauges. It processes well on most modern generation extruders and can be drawn down as low as 5 micron.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
Features 
  • Food Contact Acceptable
  • Good Processability
  • High Molecular Weight
  • High Stiffness
  • Ultra High Impact Resistance
Uses 
  • Bags
Agency Ratings 
 
Processing Method 
  • Blown Film
  • Film Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density 2
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/21.6 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Viscosity Number (Reduced Viscosity)
ml/g
 ISO 1628
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2/50
Yield, Compression Molded
psi
  
Break, Compression Molded
psi
  
Tensile Strain (Break, Compression Molded)
%
 ISO 527-2/50
Flexural Modulus (Compression Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179
-22°F, Compression Molded
ft·lb/in²
  
73°F, Compression Molded
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, Compression Molded)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/B
Peak Crystallization Temperature (DSC)
°F
 ISO 3146
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Safrene® M 9255F, Safrene M 9255F, Safrene® , Safrene, SafreneM9255F, M 9255 F, M 9255F, M9255, 9255F, M9255F, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Safripol , PolyethyleneHighDensity, 9255M
Features
Features may also be described by the following terms: Ultra High Impact Resistance, High Molecular Weight, High MW, Good Processability, Easy Processing, High Stiffness.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EU (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Extrusion Notes
Feed Zone: 170°C
Notes
1Typical properties: these are not to be construed as specifications.
2Unannealed
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.