IDES Prospector Already have an account? Login Here

IDES

Safron® R100-01NSU

Polypropylene Random Copolymer

Supplied by Safripol (PTY) LTD

The technical datasheet with complete property values for Safron® R100-01NSU is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Safron® R100-01NSU Polypropylene Resin is a clarified random copolymer suitable for injection stretch blow moulding (ISBM) and extrusion blow moulding. Containers exhibit good surface finish and excellent contact clarity.

Safron® R100-01NSU Polypropylene Resin contains a slip additive.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
Additive 
  • Clarifier
  • Slip
  
Features 
  • Contact Clarity
  • Food Contact Acceptable
  • Good Surface Finish
  • Random Copolymer
  • Slip
Uses 
  • Bottles
  • Containers
  
Agency Ratings 
 
Appearance 
  • Natural Color
Processing Method 
  • Extrusion Blow Molding
  • Injection Blow Molding
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Flexural Modulus (Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
32°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Additional Information
Blow Molding Conditions:
  • Zone 1 Temperature: 180 to 200°C
  • Zone 2 Temperature: 210 to 230°C
  • Zone 3 Temperature: 230 to 250°C
  • Zone 4 Temperature: 220 to 240°C
  • Die Temperature: 220°C
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Safron® R100-01NSU, Safron R10001NSU, Safron® , Safron, SafronR10001NSU, R 100, R 100 01 NSU, R100-01NSU, R10001NSU, R100:01NSU, R100/01NSU, R100+01NSU, R100_01NSU, R100 01NSU, R100, 10001, 01NSU, Polypropylene Random Copolymer, PP Random Copolymer, Polypropylene, PP, Safripol , PolypropyleneRandomCopolymer, PPRandomCopolymer, 100R
Features
Features may also be described by the following terms: Contact Clarity, Random Copolymer, Good Surface Finish, Slip, Unspecified Slip.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1), FDA (1).
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.