IDES Prospector Already have an account? Login Here

IDES

Safron® H511-03

Polypropylene Homopolymer

Supplied by Safripol (PTY) LTD

The technical datasheet with complete property values for Safron® H511-03 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
H511-03 Polypropylene Resin is a homopolymer developed for the production of slit film tapes. H511-03 Polypropylene Resin offers excellent processability and low water carry-over. H511-03 Polypropylene Resin is also suitable for the production of water quenched blown film and monofilaments.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
Features 
  • Food Contact Acceptable
  • Good Processability
  • Homopolymer
  • Low Water Carryover
  
Uses 
  • Carpet Backing
  • Fabrics
  • Film
  • Monofilaments
  • Rope
  • Slit-Film Fiber
  • Tape
  • Textile Applications
  • Twine
Agency Ratings 
Processing Method 
  • Blown Film
  • Filament Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield, Injection Molded)
psi
 ISO 527-2
Tensile Strain (Yield, Injection Molded)
%
 ISO 527-2
Flexural Modulus (Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F, Injection Molded)
ft·lb/in²
 ISO 179/1eA
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 2
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature 2
°F
 ISO 306/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Safron® H511-03, Safron H51103, Safron® , Safron, SafronH51103, H 511, H 511 03, H511-03, H51103, H511:03, H511/03, H511+03, H511_03, H511 03, H511, 51103, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Safripol , PolypropyleneHomopolymer, PPHomopolymer, 511H
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Low Water Carryover.
Uses
Uses may also be described by the following terms: Monofilaments, Monofilament, Slit-Film Fiber, Slit Film Fiber.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Injection Molded
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.