Safron H707-12NSM Safripol Polypropylene Homopolymer

Product Description

Safron® H707-12NSM Polypropylene Resin is a medium to high flow homopolymer developed for injection moulding. It is nucleated for applications requiring higher rigidity and allows for faster cycles.

Furthermore Safron® H707-12NSM Polypropylene Resin is formulated for easy de-moulding and contains a slip additive.

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Additive

Nucleating Agent

Slip

Features

Fast Molding Cycle

Food Contact Acceptable

Good Flow

Good Mold Release

Homopolymer

Medium Rigidity

Nucleated

Slip

Uses

Appliances

Caps

Closures

Containers

Household Goods

Outdoor Furnishings

Toys

Agency Ratings

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield, Injection Molded)		psi	ISO 527-2
Tensile Strain (Yield, Injection Molded)		%	ISO 527-2
Flexural Modulus (Injection Molded)		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F, Injection Molded)		ft·lb/in²	ISO 179/1eA
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature²
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Vicat Softening Temperature²		°F	ISO 306/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Safron® H707-12NSM, Safron H70712NSM, Safron® , Safron, SafronH70712NSM, H 707, H 707 12 NSM, H707-12NSM, H70712NSM, H707:12NSM, H707/12NSM, H707+12NSM, H707_12NSM, H707 12NSM, H707, 70712, 12NSM, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Safripol , PolypropyleneHomopolymer, PPHomopolymer, 707H
Features
Features may also be described by the following terms: Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, Good Flow, Medium Rigidity, Good Rigidity, Good Mold Release, Easy Release, Good Demolding, Slip, Unspecified Slip.
Uses
Uses may also be described by the following terms: Closure Caps, Caps, Cap, Household Goods, Housewares.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1), FDA (1).

Injection	Nominal Value	Unit
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Injection Notes
Zone 4 Temperature: 250°C

Notes

¹Typical properties: these are not to be construed as specifications.

²Injection Molded

Safron® H707-12NSM

Polypropylene Homopolymer

Supplied by Safripol (PTY) LTD