Safron H712-52RNM Safripol Polypropylene Homopolymer

Product Description

Safron® H712-52RNM Polypropylene Resin is a nucleated homopolymer for thin wall, high speed injection moulding combining a good balance of physical properties with easy processability. It is produced by controlled rheology, has a narrow molecular weight distribution and produces parts with minimal distortion.

Safron® H712-52RNM Polypropylene Resin is also suitable for extrusion coating and lamination.

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Additive

Nucleating Agent

Features

Controlled Rheology

Fast Molding Cycle

Food Contact Acceptable

Good Processability

Homopolymer

Low Warpage

Narrow Molecular Weight Distribution

Nucleated

Uses

Appliances

Business Equipment

Caps

Closures

Coating Applications

Cosmetic Packaging

Household Goods

Laminates

Stationary Supplies

Thin-walled Packaging

Agency Ratings

Processing Method

Extrusion Coating

Injection Molding

Laminating

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield, Injection Molded)		psi	ISO 527-2
Tensile Strain (Yield, Injection Molded)		%	ISO 527-2
Flexural Modulus (Injection Molded)		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F, Injection Molded)		ft·lb/in²	ISO 179/1eA
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature²
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Vicat Softening Temperature²		°F	ISO 306/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Safron® H712-52RNM, Safron H71252RNM, Safron® , Safron, SafronH71252RNM, H 712, H 712 52 RNM, H712-52RNM, H71252RNM, H712:52RNM, H712/52RNM, H712+52RNM, H712_52RNM, H712 52RNM, H712, 71252, 52RNM, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Safripol , PolypropyleneHomopolymer, PPHomopolymer, 712H
Features
Features may also be described by the following terms: Narrow Molecular Weight Distribution, Narrow MW Distribution, Good Processability, Easy Processing, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, Low Warpage, Low Warp.
Uses
Uses may also be described by the following terms: Business Equipment, Business Machines, Closure Caps, Caps, Cap, Household Goods, Housewares, Cosmetic Packaging, Thin-walled Packaging, Thin-wall Packaging, Thinwall Packaging.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1), FDA (1).

Injection	Nominal Value	Unit
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Injection Notes
Zone 4 Temperature: 260°C
Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.		°F
Cylinder Zone 2 Temp.		°F
Cylinder Zone 3 Temp.		°F
Cylinder Zone 4 Temp.		°F
Die Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²Injection Molded

Safron® H712-52RNM

Polypropylene Homopolymer

Supplied by Safripol (PTY) LTD