IDES Prospector Already have an account? Login Here

IDES

NORYL PPX* PPX830 Resin

Polyphenylene Ether + PS + PP

Glass Fiber Reinforcement, 30%

Supplied by SABIC Innovative Plastics Europe

The technical datasheet with complete property values for NORYL PPX* PPX830 Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Noryl* PPX830 Polyphenylene Oxide (PPO*) + Polypropylene (PP) resin is a 30 % Glass Reinforced, injection moldable grade with a HDT /1.8MPa temperature resistance of 153 deg C and a Tensile modulus of 7600 MPa; this grade has been developed for application where dimension stability, temperature and chemical resistance could be required. Noryl PPX830 is an opaque material available in limited colors only.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Good Chemical Resistance
  • Good Dimensional Stability
  • Medium Heat Resistance
RoHS Compliance 
Appearance 
  • Colors Available
  • Opaque
  
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (280°C/5.0 kg)
g/10 min
 ASTM D1238
Melt Volume-Flow Rate (MVR) (280°C/5.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage
     Internal Method
Flow: 0.126 in
in/in
  
Across Flow: 0.126 in
in/in
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
-- 2
psi
 ASTM D638
--
psi
 ISO 527-2/1
Tensile Strength
      
Yield 3
psi
 ASTM D638
Yield
psi
 ISO 527-2/5
Break 3
psi
 ASTM D638
Break
psi
 ISO 527-2/5
Tensile Elongation
      
Yield 3
%
 ASTM D638
Yield
%
 ISO 527-2/5
Break 3
%
 ASTM D638
Break
%
 ISO 527-2/5
Flexural Modulus
      
1.97 in Span 4
psi
 ASTM D790
-- 5
psi
 ISO 178
Flexural Strength
      
-- 5, 6
psi
 ISO 178
Yield, 1.97 in Span 4
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Charpy Unnotched Impact Strength 7
     ISO 179/1eU
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Notched Izod Impact
      
73°F
ft·lb/in
 ASTM D256
73°F 8
ft·lb/in²
 ISO 180/1A
Unnotched Izod Impact
      
73°F
ft·lb/in
 ASTM D4812
-22°F 8
ft·lb/in²
 ISO 180/1U
73°F 8
ft·lb/in²
 ISO 180/1U
Instrumented Dart Impact
     ASTM D3763
-22°F, Total Energy
in·lb
  
73°F, Total Energy
in·lb
  
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
66 psi, Unannealed, 0.126 in
°F
 ASTM D648
66 psi, Unannealed, 2.52 in Span 9
°F
 ISO 75-2/Bf
264 psi, Unannealed, 0.126 in
°F
 ASTM D648
264 psi, Unannealed, 2.52 in Span 9
°F
 ISO 75-2/Af
Vicat Softening Temperature
°F
 ISO 306/B120
Ball Pressure Test (257°F)
 
 IEC 60695-10-2
CLTE
      
Flow: -40 to 203°F
in/in/°F
 ASTM E831
Flow: -22 to 176°F
in/in/°F
 ISO 11359-2
Transverse: -40 to 203°F
in/in/°F
 ASTM E831
Transverse: -22 to 176°F
in/in/°F
 ISO 11359-2
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0394 in)
 
 UL 94
Glow Wire Flammability Index (0.118 in)
°F
 IEC 60695-2-12
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics

Product names can be difficult to match. You may have searched any one of these terms to find this product: NORYL PPX* PPX830 Resin, NORYL PPX PPX830 Resin, NORYL PPX* , NORYL PPX, NORYLPPXPPX830Resin, NORYLPPX, PPX 830 Resin, PPX830 Resin, PPX830, 830Resin, PPX830Resin, Polyphenylene Ether + PS + PP, Polyphenylene Ether PS PP, Polyphenylene Ether : PS : PP, Polyphenylene Ether / PS / PP, Polyphenylene Ether - PS - PP, Polyphenylene Ether _ PS _ PP, Polyphenylene Ether PS PP, PPE+PS+PP, PPEPSPP, PPE:PS:PP, PPE/PS/PP, PPE-PS-PP, PPE_PS_PP, PPE PS PP, Polyphenylene Ether, PPE, SABIC IP Euro, PolyphenyleneEtherPSPP, PolyphenyleneEther, PolyphenyleneEther_PS_PP, 830PPX
Features
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, Good Dimensional Stability, Dimensionally Stable, Medium Heat Resistance.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Hopper Temperature
°F
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
20.20 in/min
3Type I, 0.20 in/min
40.051 in/min
50.079 in/min
6Yield
780*10*4 sp=62mm
880*10*4
980*10*4 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.