IDES Prospector Already have an account? Login Here

IDES

Machine Cast MC-165 A/B

Polyurethane Thermoset Elastomer

Supplied by BJB Enterprises, Inc.

The technical datasheet with complete property values for Machine Cast MC-165 A/B is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
The MC-165 A/B system is a production oriented fast gel and fast de-mold system. It features a mix ratio and working time ideal for machine dispensing and rapid part mold cycling, for production applications. It also features excellent adhesion to metal, plastics, wood, and is ideal for many potting applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Fast Molding Cycle
  • Good Adhesion
  
Appearance 
  • Translucent
  • Yellow
  
Forms 
  • Liquid
Processing Method 
  • Casting
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Specific Gravity
      
Part A
lb/ft³
  
Part B
lb/ft³
  
Shrinkage 2
mil/in
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Yield)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Elastomers
Nominal Value
Unit
Test Method
Tear Strength
lbf/in
 ASTM D624
Impact
Nominal Value
Unit
Test Method
Unnotched Izod Impact
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
      
Part A
 
  
Part B
 
  
Shelf Life
wk
  
Demold Time (77°F, 0.38 in)
hr
  
Gel Time
min
  
Work Time 3 (77°F)
min
  
Fill Analysis
Nominal Value
Unit
Test Method
Brookfield Viscosity
      
Mixed: 77°F
mPa·s
  
Part A: 77°F
mPa·s
  
Part B: 77°F
mPa·s
  
Additional Information
Nominal Value
Unit
Test Method
Cure Time 4 (77°F)
day
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Machine Cast MC-165 A/B, Machine Cast MC165 AB, Machine Cast , MachineCastMC165AB, MachineCast, CastMC 165 A B, MC, CastMC-165 A/B, CastMC165 AB, CastMC-165 A:B, CastMC-165 A+B, CastMC-165 A-B, CastMC-165 A_B, CastMC-165 A B, CastMC:165 A/B, CastMC/165 A/B, CastMC+165 A/B, CastMC_165 A/B, CastMC 165 A/B, CastMC165, CastMC, MC 165 A B, CastMC165AB, CastMC165 A_B, CastMC165 A B, CastMC_165 AB, CastMC 165 AB, MC-165 A/B, MC165 AB, MC-165 A:B, MC-165 A+B, MC-165 A-B, MC-165 A_B, MC-165 A B, MC:165 A/B, MC/165 A/B, MC+165 A/B, MC_165 A/B, MC 165 A/B, MC165, 165A, AB, CastMC165A_B, CastMC_165AB, MC165AB, MC165 A_B, MC165 A B, MC_165 AB, MC 165 AB, MC165A_B, MC_165AB, Polyurethane Thermoset Elastomer, TSU, BJB Enterprises, PolyurethaneThermosetElastomer, 165MC, 165CastMC
Features
Features may also be described by the following terms: Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, Good Adhesion.
Notes
1Typical properties: these are not to be construed as specifications.
212"x1/2"x1/2"
3100g
4In order to achieve maximum physical properties, a post cure with heat is required (16 hours at 82°C). Remix part B thoroughly before use, making sure the material is within a temperature range of 75 to 85°F (24 to 29°C). Continue mixing until the material is uniform in appearance.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.