IDES Prospector Already have an account? Login Here

IDES

SAXAMID™ 126F6T3

Polyamide 6

Glass Fiber Reinforcement, 30%

Supplied by SAX Polymers

The technical datasheet with complete property values for SAXAMID™ 126F6T3 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SAXAMID 126F6T3 is a polyamide 6 injection-molding-grade reinforced with 30 % glass fibres and 15 % PTFE. Because of its high strength and stiffness this grade is often used for stressed parts requiring low friction - low friction coefficients result in very good wear resistance.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Additive 
  • PTFE Lubricant (150000 ppm)
Features 
  • Good Wear Resistance
  • High Stiffness
  • High Strength
  • Low Friction
  
RoHS Compliance 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Viscosity Number (H2SO4 (Sulphuric Acid))
cm³/g
 ISO 307
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Break)
psi
 ISO 527-2/5
Tensile Strain (Break)
%
 ISO 527-2/5
Flexural Modulus 2
psi
 ISO 178
Flexural Strength 2
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Notched Izod Impact Strength
     ISO 180/1A
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Unnotched Izod Impact Strength
     ISO 180/1U
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 3 (264 psi, Unannealed, 2.36 in Span)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B120
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SAXAMID™ 126F6T3, SAXAMID 126F6T3, SAXAMID™ , SAXAMID, SAXAMID126F6T3, 126 F 6 T 3, 126F6T3, 126F, F6, 6T, T3, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Sax Polymers, Polyamide6, Nylon6, F126
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: High Strength, High Stiffness, Low Friction, Good Wear Resistance, Wear Resistant.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
380*10*4mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.