IDES Prospector Already have an account? Login Here

IDES

Halene H E5201S

High Density Polyethylene

Supplied by Haldia Petrochemicals Ltd.

The technical datasheet with complete property values for Halene H E5201S is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
E5201S is a broad molecular weight distribution HDPE, produced by the Mitsui CX Process.

The Grade is used for General Purpose Blow Molding Applications.

E5201S combines exceptional processability and excellent mechanical properties.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Good Processability
  • Wide Molecular Weight Distribution
  
Uses 
  • Blow Molding Applications
  • General Purpose
  
Forms 
  • Pellets
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Density 2
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance (10% Igepal, Compression Molded, F50)
hr
 ASTM D1693B
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 3
     ASTM D638
Yield, Compression Molded
psi
  
Break, Compression Molded
psi
  
Tensile Elongation 3
     ASTM D638
Yield, Compression Molded
%
  
Break, Compression Molded
%
  
Flexural Modulus (Compression Molded)
psi
 ASTM D790A
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, Injection Molded)
ft·lb/in
 ASTM D256A
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D, Compression Molded)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525 4
Melting Temperature
°F
 ASTM D3418
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Halene H E5201S, Halene H , HaleneHE5201S, HaleneH, HE 5201 S, HE5201S, HE5201, E 5201 S, E5201S, E5201, 5201S, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Haldia Petrochem, PolyethyleneHighDensity, 5201E, 5201HE
Features
Features may also be described by the following terms: Wide Molecular Weight Distribution, Wide MW Distribution, Broad Molecular Weight Distribution, Good Processability, Easy Processing.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Die Temperature
°F
  
Extrusion Notes
Parison Temperature: 165 to 170°C
Cooling Water for Mold: 20 to 25°C
Notes
1Typical properties: these are not to be construed as specifications.
223°C
32.0 in/min
4Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.