MarFlex® 1125 CP Chem Polyethylene, Low Density

General

Material Status

Availability

Additive

Features

Uses

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ASTM D1238
Mechanical	Nominal Value	Unit	Test Method
Coefficient of Friction			ASTM D1894
Films	Nominal Value	Unit	Test Method
Film Thickness - Tested		mil
Oxygen Transmission Rate (1.3 mil, Blown Film)		cm³/100 in²/24 hr	ASTM D3985
Water Vapor Transmission Rate (1.3 mil, Blown Film)		g/100 in²/24 hr	ASTM F1249
Dart Drop Test - Blown Film (1.3 mil)		lbf/in	ASTM D1709
Elmendorf Tear Strength			ASTM D1922
MD, Blown Film: 1.3 mil		lbf/in
TD, Blown Film: 1.3 mil		lbf/in
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ASTM D1525
Peak Melting Temperature		°F	ASTM D3418
Optical	Nominal Value	Unit	Test Method
Gloss (60°, 1.25 mil, Blown Film)			ASTM D2457
Haze (1.25 mil, Blown Film)		%	ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: MarFlex® 1125, MarFlex 1125, MarFlex® , MarFlex, MarFlex1125, 1125, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, CP Chem, PolyethyleneLowDensity
Features
Features may also be described by the following terms: Antiblocking, Unspecified Antiblock, Good Impact Resistance, Good Drawdown, Good draw down, Good Heat Seal, Good Processability, Easy Processing.

Notes

¹Typical properties: these are not to be construed as specifications.

MarFlex® 1125