IDES Prospector Already have an account? Login Here

IDES

Ultraform® N2520 XL2

Acetal (POM) Copolymer

Supplied by BASF Corporation

The technical datasheet with complete property values for Ultraform® N2520 XL2 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
This grade has low electrical surface resistivity.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Agency Ratings 
Forms 
  • Granules
Processing Method 
  • Injection Molding
Resin ID (ISO 1043)
  • POM
Physical
Nominal Value
Unit
Test Method
Density
      
--
g/cm³
 ISO 1183
--
lb/in³
 ISO 1183 2
Apparent Density
g/cm³
 ISO 60
Melt Volume-Flow Rate (MVR) (190°C/2.16 kg)
in³/10min
 ISO 1133
Water Absorption
      
Saturation, 73°F
%
 ISO 62
Saturation
%
 ISO 62 2
Equilibrium, 73°F, 50% RH
%
 ISO 62
Equilibrium
%
 ISO 62 2
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
--
psi
 ISO 527-2
--
psi
 ISO 527-2 2
Tensile Stress
      
Break
psi
 ISO 527-2
Break
psi
 ISO 527-2 2
Tensile Strain
      
Break
%
 ISO 527-2
Break
%
 ISO 527-2 2
Impact
Nominal Value
Unit
Test Method
Charpy Unnotched Impact Strength
      
-22°F
ft·lb/in²
 ISO 179/1eU
73°F
ft·lb/in²
 ISO 179/1eU
-22°F
ft·lb/in²
 ISO 179/1eU 2
73°F
ft·lb/in²
 ISO 179/1eU 2
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 961/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
264 psi, Unannealed
°F
 ISO 75-2/A
264 psi
°F
 ISO 75-2 2
Melting Temperature
      
--
°F
 ISO 11357-3
-- 3
°F
 ISO 11357-3 2
CLTE - Flow (73 to 131°F)
in/in/°F
 ISO 11359-2
Maximum Service Temperature - Short Cycle Operation
°F
  
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
      
--
ohm·cm
 IEC 60093
--
ohm·in
 IEC 60093 2
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
Additional Information
Nominal Value
Unit
Test Method
Automotive Materials (> 39.4 mil)
 
 FMVSS 302
ISO Type
 
 ISO 9988-1
Polymer Abbreviation
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultraform® N2520 XL2, Ultraform N2520 XL2, Ultraform® , Ultraform, UltraformN2520XL2, N 2520 XL 2, N2520 XL2, N2520, 2520XL, XL2, N2520XL2, Acetal Copolymer, Acetal Copolymer, Acetal (POM) Copolymer, Acetal POM Copolymer, Acetal, pom, BASF, AcetalPOMCopolymer, 2520N
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
318 °F/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.