IDES Prospector Already have an account? Login Here

IDES

OnFlex™ BIO 5380A-E0006

Thermoplastic Elastomer

Supplied by GLS Thermoplastic Elastomers

The technical datasheet with complete property values for OnFlex™ BIO 5380A-E0006 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
OnFlex™ BIO 5300 series thermoplastic elastomer compounds are soft thermoplastic polyurethane compounds made from renewable natural sources. These compounds contain at least 20% of renewable material as certified according to ASTM-D6866. The OnFlex™ BIO 5300 series compounds are formulated to provide an excellent surface finish, soft-touch haptic, abrasion resistance and mechanical properties.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Features 
  • Good Abrasion Resistance
  • Renewable Resource Content
  • Scratch Resistant
Uses 
  • Automotive Applications
  • Consumer Applications
  • General Purpose
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Calendering
  • Extrusion
  • Injection Molding
  • Multi Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Abrasion Loss
mm³
 DIN 53516
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress 2
     DIN 53504
Across Flow: 100% Strain, 73°F, 0.0787 in
psi
  
Flow: 100% Strain, 73°F, 0.0787 in
psi
  
Across Flow: 300% Strain, 73°F, 0.0787 in
psi
  
Flow: 300% Strain, 73°F, 0.0787 in
psi
  
Tensile Stress 2
     DIN 53504
Across Flow: Break, 73°F, 0.0787 in
psi
  
Flow: Break, 73°F, 0.0787 in
psi
  
Tensile Elongation 2
     DIN 53504
Across Flow: Break, 73°F, 0.0787 in
%
  
Flow: Break, 73°F, 0.0787 in
%
  
Tear Strength 3
     ISO 34-1
Across Flow: 73°F, 0.0787 in
lbf/in
  
Flow: 73°F, 0.0787 in
lbf/in
  
Compression Set
     ISO 815
73°F, 72.0 hr
%
  
158°F, 22.0 hr
%
  
212°F, 22.0 hr
%
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore A)
 
 ISO 868
Additional Information
Nominal Value
Unit
Test Method
Odor rating 4
 
 VDA 270
Properties are measured using injection molded plaques.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: OnFlex™ BIO 5380A-E0006, OnFlex BIO 5380AE0006, OnFlex™ BIO , OnFlex BIO, OnFlexBIO5380AE0006, OnFlexBIO, 5380 A, BIO 5380 A E 0006, BIO 5380 A, BIO5380A-E0006, BIO5380AE0006, BIO5380A:E0006, BIO5380A/E0006, BIO5380A+E0006, BIO5380A_E0006, BIO5380A E0006, BIO5380, BIO5380A, 5380 A E 0006, 5380A-E0006, 5380AE0006, 5380A:E0006, 5380A/E0006, 5380A+E0006, 5380A_E0006, 5380A E0006, 5380A, AE, E0006, Thermoplastic Elastomer, TPE, GLS, ThermoplasticElastomer, A5380, 5380BIO
Features
Features may also be described by the following terms: Renewable Resources, From Renewable Resources, Renewable Resource Derived, Renewable Raw Materials, Renewable Resource Content, Good Abrasion Resistance, Abrasion Resistant, Scratch Resistant, Resists Scratches.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Notes
1Typical properties: these are not to be construed as specifications.
2Type 1, 7.9 in/min
3Method A, Trouser
4Method A3
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.