IDES Prospector Already have an account? Login Here

IDES

Stat-Tech™ NN-20CF/000 Black

Polyamide 66

Carbon Fiber Reinforcement, 20%

Supplied by PolyOne Corporation

The technical datasheet with complete property values for Stat-Tech™ NN-20CF/000 Black is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Stat-Tech™ Electrically Conductive Compounds are specifically engineered to provide anti-static, ESD and RFI/EMI shielding performance for critical electronic equipment applications. These compounds combine the performance of select engineering resins with reinforcing additives such as carbon powder, carbon fiber, nickel-coated carbon fiber and stainless steel fiber for low to high levels of conductivity depending upon application requirements.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Filler / Reinforcement 
  • Carbon Fiber Reinforcement, 20% Filler by Weight
Features 
  • Good Chemical Resistance
  • High Stiffness
  • Semi Crystalline
Uses 
  • Aerospace Applications
  • Automotive Electronics
  • Business Equipment
  • Computer Components
  • Connectors
  • Consumer Applications
  • Electrical Housing
  • Electrical/Electronic Applications
  • Housings
  • Sporting Goods
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage
     ASTM D955
Flow
in/in
  
Across Flow
in/in
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2
psi
 ASTM D638
Tensile Strength (Break)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in, Injection Molded)
ft·lb/in
 ASTM D256A
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, 0.250 in
°F
  
264 psi, Unannealed, 0.250 in
°F
  
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
 ASTM D257
Volume Resistivity
ohm·cm
 ASTM D257
Static Decay - (Mil-B-81705C), 12% RH, 5000 kV to 50 kV
sec
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Stat-Tech™ NN-20CF/000 Black, StatTech NN20CF000 Black, Stat-Tech™ , StatTech, Stat:Tech™, Stat/Tech™, Stat+Tech™, Stat_Tech™, Stat Tech™, StatTechNN20CF000Black, Stat_Tech, Stat Tech, NN, NN 20 CF 000 Black, NN-20CF/000 Black, NN20CF000 Black, NN-20CF:000 Black, NN-20CF+000 Black, NN-20CF-000 Black, NN-20CF_000 Black, NN-20CF 000 Black, NN:20CF/000 Black, NN/20CF/000 Black, NN+20CF/000 Black, NN_20CF/000 Black, NN 20CF/000 Black, NN20, 20CF, CF000, 000Black, NN20CF000Black, NN20CF_000 Black, NN20CF 000 Black, NN_20CF000 Black, NN 20CF000 Black, NN20CF_000Black, NN_20CF000Black, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, PolyOne, Polyamide66, Nylon66, 20NN
Generic Name
Generic Name may also be described by the following terms: PA66.
Features
Features may also be described by the following terms: Semi-Crystalline, High Stiffness, Good Chemical Resistance, Chemical Resistant.
Uses
Uses may also be described by the following terms: Business Equipment, Business Machines, Housings, Housing, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Computer Components, Computer Parts, Electrical Housings, Electrical Housing.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 0.20 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.