IDES Prospector Already have an account? Login Here

IDES

FireCon™ CPE 30-2 BLACK

Chlorinated Polyethylene

Supplied by PolyOne Corporation

The technical datasheet with complete property values for FireCon™ CPE 30-2 BLACK is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
CPE-30-2 BLACK is a heavy duty thermoplastic jacket for power and control cables. It is suitable for VW1 and tray fire rated applications. CPE-30-2 BLACK has a good balance of low temperature, oil resistance and fire retardant properties.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  • South America
Uses 
  • Cable Jacketing
  • Wire & Cable Applications
  
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Appearance
 
 ASTM D2090
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2
psi
 ASTM D638
Tensile Strength 2 (Break)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D, 10 sec)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Flammability
Nominal Value
Unit
Test Method
Oxygen Index (0.0750 in)
%
 ASTM D2863
Additional Information
Note: Pre-drying is recommended for 4 hours at 175°-185°F.
Note: Typical processing temperatures range between 320°-390°F depending upon screw design. Contact Technical Service for recommendation for specific equipment.
NOTE: Typical Properties of Molded Slab (0.075"); Not to be Construed as Specifications.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: FireCon™ CPE 30-2 BLACK, FireCon CPE 302 BLACK, FireCon™ , FireCon, FireConCPE302BLACK, CPE 30, CPE 30-2 BLACK, CPE 302 BLACK, CPE 30:2 BLACK, CPE 30/2 BLACK, CPE 30+2 BLACK, CPE 30_2 BLACK, CPE 30 2 BLACK, CPE30, 302, 2BLACK, CPE302BLACK, CPE30_2BLACK, Polyethylene, Chlorinated, Polyethylene Chlorinated, CPE, Polyethylene, PE, PolyOne, PolyethyleneChlorinated, 30CPE
Uses
Uses may also be described by the following terms: Wire and Cable Applications, Wire & Cable Applications.
Notes
1Typical properties: these are not to be construed as specifications.
2Type IV, 20 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.