Dynalloy™ 8900-80

Product names can be difficult to match. You may have searched any one of these terms to find this product: Dynalloy™ 8900-80, Dynalloy 890080, Dynalloy™ , Dynalloy, Dynalloy890080, 8900, 8900-80, 890080, 8900:80, 8900/80, 8900+80, 8900_80, 8900 80, Thermoplastic Elastomer, TPE, GLS, ThermoplasticElastomer, 808900

Features may also be described by the following terms: Good Colorability, High Flow, High Melt, High MFI, Good Processability, Easy Processing, Good Processing Stability, Good Process Stability.

Uses may also be described by the following terms: Flexible Grips, Household Goods, Housewares, Food Applications, Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts.

This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), BfR (1).

Color concentrates with polypropylene (PP), ethylene vinyl acetate (EVA), or low density polyethylene (PE) carriers are most suitable for coloring Dynalloy™ 8900-series. Improved color dispersion can be achieved by using higher melt flow concentrates (with a melt flow from 25 - 40 g/10 min). Typical loadings for color concentrates are 1% to 5% by weight. Concentrates based on PVC should not be used. The final determination of color concentrate suitability should be determined by customer trials.

Purge thoroughly before and after use of this product with a low flow (0.5 - 2.5 MFR) polyethylene (PE) or polypropylene (PP).

The Dynalloy™ 8900-series has excellent melt stability. Maximum residence times may vary, depending on the size of the barrel. Generally, the barrel should be emptied if it is idle for periods of 8 - 10 minutes or longer.

Drying is not Required

Injection Speed: 1 to 3 in/sec
1st Stage - Boost Pressure: 175 to 800 psi
2nd Stage - Hold Pressure: 30% of Boost
Hold Time (Thick Part): 3 to 10 sec
Hold Time (Thin Part): 1 to 3 sec