IDES Prospector Already have an account? Login Here

IDES

OnForce™ LFT PP-50 LGF/000 Natural

Polypropylene Homopolymer

Long Glass Fiber, 50%

Supplied by PolyOne Corporation

The technical datasheet with complete property values for OnForce™ LFT PP-50 LGF/000 Natural is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PolyOne's Long Fiber Thermoplastic (LFT) compounds are formulated for demanding applications which require high stiffness and good impact such as metal replacement or other structural applications. These products exhibit enhanced physical and mechanical properties versus standard short fiber products. Benefits of LFT compounds include improved impact strength, elastic modulus, and material strength across wide temperature ranges from subambient to highly elevated. Furthermore, LFT compounds have been shown to offer improved performance in the areas of creep and fatigue performance, improved dimensional stability, and exhibit an exceptional surface finish when compared to traditional highly filled short fiber products.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Filler / Reinforcement 
  • Long Glass Fiber, 50% Filler by Weight
RoHS Compliance 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2
psi
 ASTM D638
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in, Injection Molded)
ft·lb/in
 ASTM D256
Unnotched Izod Impact
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: OnForce LFT PP 50 LGF 000 Natural, OnForce™ LFT PP-50 LGF/000 Natural , OnForce LFT PP50 LGF000 Natural, OnForce™ LFT , OnForce LFT, OnForceLFTPP50LGF000Natural, OnForceLFT, LFTPP 50 LGF 000 Natural, PP, LFTPP-50 LGF/000 Natural, LFTPP50 LGF000 Natural, LFTPP-50 LGF:000 Natural, LFTPP-50 LGF+000 Natural, LFTPP-50 LGF-000 Natural, LFTPP-50 LGF_000 Natural, LFTPP-50 LGF 000 Natural, LFTPP:50 LGF/000 Natural, LFTPP/50 LGF/000 Natural, LFTPP+50 LGF/000 Natural, LFTPP_50 LGF/000 Natural, LFTPP 50 LGF/000 Natural, LFTPP50, LFTPP, PP 50 LGF 000 Natural, LFTPP50LGF000Natural, LFTPP50 LGF_000 Natural, LFTPP50 LGF 000 Natural, LFTPP_50 LGF000 Natural, LFTPP 50 LGF000 Natural, PP-50 LGF/000 Natural, PP50 LGF000 Natural, PP-50 LGF:000 Natural, PP-50 LGF+000 Natural, PP-50 LGF-000 Natural, PP-50 LGF_000 Natural, PP-50 LGF 000 Natural, PP:50 LGF/000 Natural, PP/50 LGF/000 Natural, PP+50 LGF/000 Natural, PP_50 LGF/000 Natural, PP 50 LGF/000 Natural, PP50, 50LGF, LGF000, 000Natural, LFTPP50LGF_000Natural, LFTPP_50LGF000Natural, PP50LGF000Natural, PP50 LGF_000 Natural, PP50 LGF 000 Natural, PP_50 LGF000 Natural, PP 50 LGF000 Natural, PP50LGF_000Natural, PP_50LGF000Natural, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PolyOne, PolypropyleneHomopolymer, PPHomopolymer, 50PP, 50LFTPP
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 0.20 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.