IDES Prospector Already have an account? Login Here

IDES

OnFlex™ HFFR 320-01

Thermoplastic Elastomer

Supplied by GLS Thermoplastic Elastomers

The technical datasheet with complete property values for OnFlex™ HFFR 320-01 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
OnFlex™ HFFR 320-01 is a non-halogen flame retardant material designed for flexible power cord insulation and cable jackets.
New Product. Commercial specifications have not been established.
  • Non-halogen flame retardant
  • UL62 compliant
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Features 
  • Flame Retardant
Uses 
  • Cable Jacketing
  • Flexible Cord Insulation
  
Agency Ratings 
Appearance 
  • Black
  • Green
  • Natural Color
  • White
  
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
 UL 1581
Tensile Elongation (Break)
%
 UL 1581
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength 2, 3 (Break, 73°F)
psi
 ASTM D412
Tensile Elongation 2, 3 (Break, 73°F)
%
 ASTM D412
Tear Strength
lbf/in
 ASTM D624
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A, 10 sec)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
UL Temperature Rating
°F
 UL 1581
Heat Deformation 4 (302°F)
%
 UL 1581
Aging
Nominal Value
Unit
Test Method
Aging Resistance 5
     UL 1581
Thermal aging elongation retension: 277°F
%
  
Thermal aging tensile retension: 277°F
%
  
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity 6 (73°F)
ohm·cm
 ASTM D257
Dielectric Strength 7 (73°F, 0.0210 in)
V/mil
 ASTM D149
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0591 in, All Color
 
  
0.118 in, All Color
 
  
Oxygen Index 8
%
 ASTM D2863
VW-1
 
 UL 1581
Fill Analysis
Nominal Value
Unit
Test Method
Apparent Viscosity
     ASTM D3835
392°F, 67.0 sec^-1
Pa·s
  
392°F, 11200 sec^-1
Pa·s
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: OnFlex™ HFFR 320-01, OnFlex HFFR 32001, OnFlex™ , OnFlex, OnFlexHFFR32001, HFFR 320, HFFR 320-01, HFFR 32001, HFFR 320:01, HFFR 320/01, HFFR 320+01, HFFR 320_01, HFFR 320 01, HFFR320, 32001, HFFR32001, HFFR320_01, Thermoplastic Elastomer, TPE, GLS, ThermoplasticElastomer, 320HFFR
Uses
Uses may also be described by the following terms: Flexible Cord Insulation.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): UL (1).
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Die Temperature
°F
  
Extrusion Notes
Purge thoroughly before and after use of this product with a low flow (0.5 - 2.5 MFR) polyethylene (PE) or polypropylene (PP).
Notes
1Typical properties: these are not to be construed as specifications.
2Die C
32 hr
4300g
5168hrs.
650% RH, ASTM D257-07
750% RH, ASTM D149-97a(04)
8ASTM D2863-08
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.