Versaflex CL E90 GLS Thermoplastic Elastomer

Product Description

Versaflex™ CL E90 is an exceptional clarity, high performance and autoclavable solution ideal for healthcare and food packaging. Versaflex™ CL E90 is also formulated without the use of plasticizers.
New Product. Commercial specifications have not been established.

Flexible

Formulated without Plasticizers

High Clarity

Stable under Radiation and Autoclave Sterilization

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Asia Pacific

Europe

North America

South America

Features

Autoclave Sterilizable

Good Flexibility

High Clarity

Radiation Sterilizable

Uses

Bottles

Film

Medical/Healthcare Applications

Personal Care

Agency Ratings

RoHS Compliance

Appearance

Clear/Transparent

Forms

Pellets

Processing Method

Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Films	Nominal Value	Unit	Test Method
Oxygen Permeability			ASTM D3985
70°F, 4.7 mil		cm³·mil/100in²/atm/24 hr
70°F, 73 mil		cm³·mil/100in²/atm/24 hr
Oxygen Transmission Rate			ASTM D3985
70°F, 4.7 mil		cm³/100 in²/24 hr
70°F, 73 mil		cm³/100 in²/24 hr
Elastomers	Nominal Value	Unit	Test Method
Tensile Stress^3, 4			ASTM D412
100% Strain, 73°F		psi
300% Strain, 73°F		psi
Tensile Strength^3, 4 (Break, 73°F)		psi	ASTM D412
Tensile Elongation^3, 4 (Break, 73°F)		%	ASTM D412
Compression Set			ASTM D395B
72°F, 22.0 hr		%
158°F, 22.0 hr		%
212°F, 22.0 hr		%
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 10 sec)			ASTM D2240
Fill Analysis	Nominal Value	Unit	Test Method
Apparent Viscosity			ASTM D3835
392°F, 1340 sec^-1		Pa·s
392°F, 11200 sec^-1		Pa·s
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Versaflex™ CL E90, Versaflex CL E90, Versaflex™ , Versaflex, VersaflexCLE90, CL E 90, CL E90, CLE, E90, CLE90, Thermoplastic Elastomer, TPE, GLS, ThermoplasticElastomer, ECL
Features
Features may also be described by the following terms: Autoclave Sterilization, Autoclave Sterilizable, Good Flexibility, Flexible, Radiation Sterilizable, Radiation Sterilization, gamma sterilization, gamma sterilizable, High Clarity.
Uses
Uses may also be described by the following terms: Medical Applications.
Agency Ratings
This plastic material has 4 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): ISO (2), USP (1), FDA (1).

Extrusion	Nominal Value	Unit
Melt Temperature		°F
Die Temperature		°F
Extrusion Notes
Color concentrates with polypropylene (PP), ethylene vinyl acetate (EVA), or low density polyethylene (PE) carriers are most suitable for coloring Versaflex™ CL E90. Improved color dispersion can be achieved by using higher melt flow concentrates (with a melt flow from 25 - 40g/10 min). Typical loadings for color concentrates are 1% to 5% by weight. Liquid color can be used, but mineral oil based carriers may have a significant effect on the final hardness value. Concentrates based on PVC should not be used. A high color match consistency can be obtained by using precolored compounds available from GLS. The final determination of color concentrate suitability should be determined by customer trials. Purge thoroughly before and after use of this product with a low flow (0.5 - 2.5 MFR) polyethylene (PE) or polypropylene (PP). Drying is not Required. Rear Zone = 330-370F Center Zone = 350-400F Front Zone = 360-420F Screw Speed = 100-500 RPM

Notes

¹Please contact GLS Thermoplastic Elastomers for a copy of the FDA compliance letter.

²Typical properties: these are not to be construed as specifications.

³Die C

⁴2 hr

Versaflex™ CL E90

Thermoplastic Elastomer

Supplied by GLS Thermoplastic Elastomers