IDES Prospector Already have an account? Login Here

IDES

AD majoris AFR 081

Polypropylene Copolymer

Supplied by AD majoris

The technical datasheet with complete property values for AD majoris AFR 081 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
AFR 081 is a low halogen flame retardant compound UL 94 V2, intended for extrusion and profiles. The product is available in natural but other colours can be provided on request

AFR 081 produce very low level of toxicity and low smoke density in the case of a fire.

AFR 081 is especially designed for non-pressure pipe and thin-walled corrugated pipes.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Flame Retardant
Features 
  • Copolymer
  • Flame Retardant
  • Low Halogen Content
  • Low Smoke Emission
  • Low Toxicity
Uses 
  • Corrugated Pipe
  • Piping
  • Profiles
Appearance 
  • Colors Available
  • Natural Color
 
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Pipe Extrusion
  • Profile Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
ISO 527-2/50
Tensile Strain (Yield)
%
ISO 527-2/50
Flexural Modulus 2
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength (-4°F)
ft·lb/in²
ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
ISO 75-2/B
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.126 in)
 
UL 94
Glow Wire Ignition Temperature (0.0787 in)
°F
IEC 60695-2-13
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AD majoris AFR 081, AD majoris , ADmajorisAFR081, ADmajoris, majorisAFR 081, majoris, majorisAFR081, AFR 081, AFR081, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, PolypropyleneCopolymer, PPCopolymer, 081AFR, 081majorisAFR
Features
Features may also be described by the following terms: Low Smoke Emission, Low Halogen Content, Low Toxicity.
Uses
Uses may also be described by the following terms: Piping, Pipe, Corrugated Pipe.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
 
Cylinder Zone 2 Temp.
°F
 
Cylinder Zone 3 Temp.
°F
 
Cylinder Zone 4 Temp.
°F
 
Melt Temperature
°F
 
Head Temperature
°F
 
Die Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.