IDES Prospector Already have an account? Login Here

IDES

DINALON® A1S25 C10-4152

Polyamide 6

Carbon Fiber Reinforcement, 10%

Supplied by Grupo Repol

The technical datasheet with complete property values for DINALON® A1S25 C10-4152 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Carbon Fiber Reinforcement, 10% Filler by Weight
Features 
  • Conductive
Appearance 
  • Black
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/5
Tensile Strain (Break)
%
 ISO 527-2/5
Flexural Modulus 2
psi
 ISO 178
Flexural Strength 2
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D257
Additional Information
Nominal Value
Unit
Test Method
Humidity
%
 ISO 15512/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: DINALON® A1S25 C10-4152, DINALON A1S25 C104152, DINALON® , DINALON, DINALONA1S25C104152, A 1 S 25 C 10, A1S25 C10, A 1 S 25 C 10 4152, A1S25C10, A1S25 C10-4152, A1S25 C104152, A1S25 C10:4152, A1S25 C10/4152, A1S25 C10+4152, A1S25 C10_4152, A1S25 C10 4152, A1, 1S, S25, 25C, C10, 104152, A1S25C104152, A1S25C10_4152, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Grupo Repol, Polyamide6, Nylon6, 1A
Generic Name
Generic Name may also be described by the following terms: PA6.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.