IDES Prospector Already have an account? Login Here

IDES

INSPIRE™ 361

Polypropylene

Supplied by Braskem Europe GmbH

The technical datasheet with complete property values for INSPIRE™ 361 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
INSPIRE™ 361 Performance Polymer has been specifically developed for film extrusion applications. INSPIRE™ 361 Performance Polymer features high clarity.

Applications for INSPIRE 361 Performance Polymer:
  • Film
  • Shrink film

Regulatory Information
INSPIRE™ 361 Performance Polymer should comply with:
  • Europe EU-Directive 2002/72/EC
  • U.S. FDA 21 CFR 177.1520(c) 3.1a
  • The appropriate regulations should be consulted for more detailed information.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Agency Ratings 
 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Modulus
     ISO 527-3
1% Secant, MD: 2.0 mil, Blown Film
psi
  
1% Secant, TD: 2.0 mil, Blown Film
psi
  
Tensile Stress
     ISO 527-3
MD: Break, 2.0 mil, Blown Film
psi
  
TD: Break, 2.0 mil, Blown Film
psi
  
Tensile Elongation
     ISO 527-3
MD: Break, 2.0 mil, Blown Film
%
  
TD: Break, 2.0 mil, Blown Film
%
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 2 (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature 2
°F
 ISO 306/A
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.97 mil, Blown Film)
 
 ASTM D2457
Haze (1.97 mil, Blown Film)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INSPIRE™ 361, INSPIRE 361, INSPIRE™ , INSPIRE, INSPIRE361, 361, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Braskem EU, PolypropyleneUnspecified, PPUnspecified
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1), FDA (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Extrusion Notes
Fabrication conditions for blown film:
  • Die gap: 1.0 mm
  • Melt Temperature: 230°C
  • Blow-up Ratio: 2.5:1
Notes
1Typical properties: these are not to be construed as specifications.
2Injection Molded
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.