IDES Prospector Already have an account? Login Here

IDES

PEARLTHANE® ECO D12T90

Thermoplastic Polyurethane Elastomer

Supplied by Merquinsa

The technical datasheet with complete property values for PEARLTHANE® ECO D12T90 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PEARLTHANE® ECO D12T90 is a 91 Shore A , High Performance natural TPU based on Renewable Sources for Injection Moulding applications This natural TPU resin features properties similar to standard TPU of same hardness (i.e. excellent mechanical properties and abrasion resistance).

PEARLTHANE® ECO D12T90 contains 37% of renewable material.

PEARLTHANE® ECO D12T90 enhances the performance of a wide range of end use products that ranges from automotive, consumer electronics and sport and leisure applications among others where environmentally-friendly materials can bring value to the end product.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Good Abrasion Resistance
  • Renewable Resource Content
  
Uses 
  • Automotive Applications
  • Consumer Applications
  • Electrical/Electronic Applications
  • Sporting Goods
  
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
-- 2
g/cm³
 DIN 53479
Moisture Content 3
%
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Abrasion Loss
mm³
 DIN 53516
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress
     ASTM D412, DIN 53504
100% Strain
psi
  
300% Strain
psi
  
Tensile Strength
      
Yield
psi
 ASTM D412
Yield
psi
 DIN 53504
Tensile Elongation (Break)
%
 ASTM D412, DIN 53504
Tear Strength
      
-- 4
lbf/in
 ASTM D624
--
lbf/in
 DIN 53515
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240, DIN 53505
Thermal
Nominal Value
Unit
Test Method
Glass Transition Temperature 5
°F
 DIN 51007
Melting Temperature 6
°F
 Internal Method
Additional Information
Nominal Value
Unit
Test Method
Biobased Content
%
 ASTM D6866
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: PEARLTHANE® ECO D12T90, PEARLTHANE ECO D12T90, PEARLTHANE® ECO , PEARLTHANE ECO, PEARLTHANEECOD12T90, PEARLTHANEECO, ECOD 12 T 90, ECOD12T90, ECOD12, ECO, D 12 T 90, D12T90, D12, 12T, T90, Thermoplastic Polyurethane Elastomer, Unspecified, Thermoplastic Polyurethane Elastomer Unspecified, TPU, Unspecified, TPU Unspecified, Thermoplastic Polyurethane, TPU, Merquinsa, ThermoplasticPolyurethaneElastomerUnspecified, TPUUnspecified, ThermoplasticPolyurethane, 12D, 12ECOD
Features
Features may also be described by the following terms: Good Abrasion Resistance, Abrasion Resistant, Renewable Resources, From Renewable Resources, Renewable Resource Derived, Renewable Raw Materials, Renewable Resource Content.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Automotive Applications, Automotive Sector.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Screw L/D Ratio
 
  
Injection Notes
Closing force: 30 tons
Screw diameter: 1.02 in
Maximum hydraulic pressure: 3050 psi
Mould: Plaque 4.7x4.7x0.08 in
Notes
1Typical properties: these are not to be construed as specifications.
220°C
3MQSA 44
4Die C
550°F/min
6Temperature at which MFI = 10 g/10 min @ 21.6 kg
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.