IDES Prospector Already have an account? Login Here

IDES

OnFlex™ S EH 80A-3S7005

Thermoplastic Elastomer

Supplied by GLS Thermoplastic Elastomers

The technical datasheet with complete property values for OnFlex™ S EH 80A-3S7005 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
OnFlex™ S EH thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds are formulated to deliver a great cost/performance ratio in addition to typical OnFlex™ S properties such as a wide hardness range, good mechanical properties, good processability, good colourability and a wide temperature operating range. OnFlex™ S EH compounds are filled, and are therefore opaque and have a moderately high density.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Features 
  • General Purpose
Uses 
  • Appliances
  • Automotive Applications
  • Consumer Applications
  • General Purpose
  • Industrial Applications
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Abrasion Loss
mm³
 DIN 53516
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 37
100% Strain
psi
  
300% Strain
psi
  
Tensile Stress (Break)
psi
 ISO 37
Tensile Elongation (Break)
%
 ISO 37
Tear Strength
lbf/in
 ISO 34-1
Compression Set
     ISO 815
73°F, 72.0 hr
%
  
158°F, 22.0 hr
%
  
212°F, 22.0 hr
%
  
Fogging (212°F)
mg
 DIN 75201B
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore A)
 
 ISO 868
Flammability
Nominal Value
Unit
Test Method
Glow Wire Flammability Index (0.0787 in)
°F
 IEC 60695-2-12
Additional Information
Nominal Value
Unit
Test Method
Generic Material Type
 
  
Odor rating
 
 VDA 270
Properties are measured using injection molded plaques.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: OnFlex™ S EH 80A-3S7005, OnFlex S EH 80A3S7005, OnFlex™ , OnFlex, OnFlexSEH80A3S7005, S EH 80 A, S EH 80A, S EH 80 A 3 S 7005, SEH80A, S EH 80A-3S7005, S EH 80A3S7005, S EH 80A:3S7005, S EH 80A/3S7005, S EH 80A+3S7005, S EH 80A_3S7005, S EH 80A 3S7005, SEH, EH80, 80A, A3, 3S, S7005, SEH80A3S7005, SEH80A_3S7005, Thermoplastic Elastomer, TPE, GLS, ThermoplasticElastomer, EHS
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.