IDES Prospector Already have an account? Login Here

IDES

OnFlex™ S KG 40A-3S2016

Thermoplastic Elastomer

Supplied by GLS Thermoplastic Elastomers

The technical datasheet with complete property values for OnFlex™ S KG 40A-3S2016 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
OnFlex™-S KG thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds are specially compatabilized to provide excellent adhesion to polyamide polymers including PA6, PA6.6, PA11 and PA12. OnFlex™-S KG can be processed by 2K molding or overmolding, insert molding or co-extrusion. In addition to this, OnFlex™-S KG compounds are formulated to provide good processability and a good cost/performance ratio, a wide hardness range, good colourability and good mechanical properties.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Features 
  • General Purpose
  • Good Adhesion
  
Uses 
  • Automotive Applications
  • Consumer Applications
  • Industrial Applications
  • Overmolding
  • Power/Other Tools
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Coextrusion
  • Multi Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 37
100% Strain
psi
  
300% Strain
psi
  
Tensile Stress (Break)
psi
 ISO 37
Tensile Elongation (Break)
%
 ISO 37
Tear Strength
lbf/in
 ISO 34-1
Compression Set
     ISO 815
73°F, 72.0 hr
%
  
158°F, 22.0 hr
%
  
212°F, 22.0 hr
%
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore A)
 
 ISO 868
Additional Information
Nominal Value
Unit
Test Method
Generic Material Type
 
  
Properties are measured using injection molded plaques.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: OnFlex™ S KG 40A-3S2016, OnFlex S KG 40A3S2016, OnFlex™ , OnFlex, OnFlexSKG40A3S2016, S KG 40 A, S KG 40A, S KG 40 A 3 S 2016, SKG40A, S KG 40A-3S2016, S KG 40A3S2016, S KG 40A:3S2016, S KG 40A/3S2016, S KG 40A+3S2016, S KG 40A_3S2016, S KG 40A 3S2016, SKG, KG40, 40A, A3, 3S, S2016, SKG40A3S2016, SKG40A_3S2016, Thermoplastic Elastomer, TPE, GLS, ThermoplasticElastomer, KGS
Features
Features may also be described by the following terms: Good Adhesion.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Power Tools, Tools.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.