IDES Prospector Already have an account? Login Here

IDES

OnFlex™ S FR 70A-3S1890

Thermoplastic Elastomer

Supplied by GLS Thermoplastic Elastomers

The technical datasheet with complete property values for OnFlex™ S FR 70A-3S1890 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
OnFlex™-S FR thermoplastic elastomer compounds are based on hydrogenated styrenic block copolymers. This range of compounds are specially flame retarded with a highly effective, RoHS compliant halogen based flame retardant system. Furthermore, OnFlex™-S FR compounds offer excellent mechanical properties, good elevated temperature compression set performance, very wide hardness range and good processability.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Features 
  • Flame Retardant
  • Halogenated
  
Uses 
  • Automotive Applications
  • Business Equipment
  • Electrical/Electronic Applications
  • General Purpose
  • Industrial Applications
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 37
100% Strain
psi
  
300% Strain
psi
  
Tensile Stress (Break)
psi
 ISO 37
Tensile Elongation (Break)
%
 ISO 37
Tear Strength
lbf/in
 ISO 34-1
Compression Set
     ISO 815
73°F, 72.0 hr
%
  
158°F, 22.0 hr
%
  
212°F, 22.0 hr
%
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore A)
 
 ISO 868
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0591 in)
 
 UL 94
Glow Wire Flammability Index (0.0787 in)
°F
 IEC 60695-2-12
Oxygen Index
%
 ISO 4589-2
Additional Information
Nominal Value
Unit
Test Method
Generic Material Type
 
  
Properties are measured using injection molded plaques.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: OnFlex™ S FR 70A-3S1890, OnFlex S FR 70A3S1890, OnFlex™ , OnFlex, OnFlexSFR70A3S1890, S FR 70 A, S FR 70A, S FR 70 A 3 S 1890, SFR70A, S FR 70A-3S1890, S FR 70A3S1890, S FR 70A:3S1890, S FR 70A/3S1890, S FR 70A+3S1890, S FR 70A_3S1890, S FR 70A 3S1890, SFR, FR70, 70A, A3, 3S, S1890, SFR70A3S1890, SFR70A_3S1890, Thermoplastic Elastomer, TPE, GLS, ThermoplasticElastomer, FRS
Features
Features may also be described by the following terms: Halogenated, Contains Halogen.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Business Equipment, Business Machines, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.