IDES Prospector Already have an account? Login Here

IDES

Braskem PE AD 57

High Density Polyethylene

Supplied by Braskem

The technical datasheet with complete property values for Braskem PE AD 57 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Description:
AD57 resin is a High Density Polyethylene, copolymer of butene-1, produced by solution process, designed for raffia extrusion and Raschel knitted with excellent optical and mechanical properties, associated with good processability. It contains antioxidant additives.

Application:
Raschel knitted; raffia extrusion; tarpaulin; general use; monofilaments; oriented structures.

Process:
The optimum processing conditions vary with the type of equipment used in the production:
  • cast film - typical temperature profile: 190 to 230°C.
  • blown film - typical temperature profile: 190 to 215°C.
  • monofilament - typical temperature profile: 190 to 230°C.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Good Processability
  • High Gloss
Uses 
  • Bags
  • Monofilaments
  
Agency Ratings 
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation
     ASTM D638
Yield
%
  
Break
%
  
Flexural Modulus - 1% Secant
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525 2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Braskem PE AD 57, Braskem PE , BraskemPEAD57, BraskemPE, PEAD 57, PE, PEAD57, AD 57, AD57, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, Braskem, PolyethyleneHighDensity, 57AD, 57PEAD
Features
Features may also be described by the following terms: High Gloss, Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Monofilaments, Monofilament.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.