Braskem PE BS 002 B Braskem Polyethylene, High Density

Product Description

Resin BS 002B is a Polyethylene of High Density, monomodal copolymer with properties differentiated optics. It presents good rigidity, good resistance to the environmental stress cracking, resistance to the impact for fall and excellent regularity and uniformity in the processing.

General

Material Status

Commercial: Discontinued

Availability

Latin America

North America

South America

Features

Copolymer

Food Contact Acceptable

Good Impact Resistance

Good Processability

High Density

High ESCR (Stress Crack Resist.)

Medium Rigidity

Uses

Bottles

Cosmetics

Food Packaging

Sheet

Agency Ratings

Processing Method

Blow Molding

Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--			ASTM D792
--		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR)			ASTM D1238
190°C/2.16 kg		g/10 min
190°C/21.6 kg		g/10 min
Environmental Stress-Cracking Resistance² (122°F, 0.0787 in, 10% Igepal, Compression Molded, F50)		hr	ASTM D1693
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
Yield		psi
Break		psi
Flexural Modulus		psi	ASTM D790
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)			ASTM D2240
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (66 psi, Unannealed)		°F	ASTM D648
Vicat Softening Temperature		°F	ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Braskem PE BS 002 B, Braskem PE , BraskemPEBS002B, BraskemPE, PEBS 002 B, PEBS002, PE, PEBS002B, BS 002 B, BS002, 002B, BS002B, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, Braskem, PolyethyleneHighDensity, 002BS, 002PEBS
Features
Features may also be described by the following terms: High Density, High Specific Gravity, Medium Rigidity, Good Rigidity, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Impact Resistance, Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Food Packaging.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.		°F
Melt Temperature		°F
Extrusion Notes
Screw L/D ratio: >= 24 Mold temperature: 5 to 25°C Blow-up ratio: 3.0:1.0 to 4.5:1.0 Screen pack: 40/60/40 mesh

Notes

¹Typical properties: these are not to be construed as specifications.

²notched plaques

Braskem PE BS 002 B

High Density Polyethylene

Supplied by Braskem