IDES Prospector Already have an account? Login Here

IDES

Braskem PE BS 002 HS

High Density Polyethylene

Supplied by Braskem

The technical datasheet with complete property values for Braskem PE BS 002 HS is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Resin BS 002 HS is a Polyethylene of High Density, bimodal copolymer. It presents good rigidity, excellent resistance to the environmental stress cracking, good resistance to the impact for fall, good reproducibility of the weight of the bottles, excellent regularity and uniformity in the processing.
Application:
Bottles for cleaning products; food products; surface-active agents and cosmetics.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Features 
  • Copolymer
  • Good Impact Resistance
  • Good Processability
  • High ESCR (Stress Crack Resist.)
  • High Rigidity
Uses 
  • Bottles
Agency Ratings 
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/2.16 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
Environmental Stress-Cracking Resistance
     ASTM D1693
122°F, 0.0787 in, 10% Igepal, F50
hr
  
122°F, 0.0787 in, 100% Igepal, F50
hr
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
Yield
psi
  
Break
psi
  
Flexural Modulus - 1% Secant
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Braskem PE BS 002 HS, Braskem PE , BraskemPEBS002HS, BraskemPE, PEBS 002 HS, PEBS002, PE, PEBS002HS, BS 002 HS, BS002, 002HS, BS002HS, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, Braskem, PolyethyleneHighDensity, 002BS, 002PEBS
Features
Features may also be described by the following terms: High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Impact Resistance, Good Processability, Easy Processing, High Rigidity.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.